[asterisk-users] Asterisk reject SIP INTITE from different source ports

[Gareth Blades]

Sounds like you have a firewall or NAT issue

Deepika Nijhawan wrote:
> Tried this... it got connected, but I can't hear any audio now whereas codec
> was allowed and both negotiated on alaw.
> 
> Deepika
>      
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Faisal Hanif
> Sent: 15 June 2010 18:30
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: Re: [asterisk-users] Asterisk reject SIP INTITE from different
> source ports
> 
> Try setting "insecure=port,invite" in sip peer config.
> 
> Regards,
> 
> Faisal Hanif
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gareth Blades
> Sent: Tuesday, June 15, 2010 9:14 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Asterisk reject SIP INTITE from different
> source ports
> 
> Deepika Nijhawan wrote:
>> It just gives no matching peer error and doesn't pick their sip 
>> configuration, so do not go to any context in extentions.conf.
>>
>>  
>>
>> VERBOSE[3252] chan_sip.c: No matching peer for 'calling number' from 
>> IP:4604'
>>
> 
> So the question is why didnt it match anything.
> If the phones are registering then they should reregister before 
> choosing a different port.
> 
> Are they going through a firewall by any chance?
> 
>