[asterisk-users] ztdummy IVR no voice

[jordan pan]

Thanks for your reply. this case happens sometimes,may be one twentieth.

yes，the ztdummy is using the RTC, and i make sure the USE_RTC had defined in
ztdummy.c.

and i will use the method in patch 13930.

Thanks.

Best wishs to you!

jordan



2010/7/12 Shaun Ruffell <sruffell at digium.com>

> On 7/11/10 9:47 PM, jordan pan wrote:
>
>> In my pbx ,there is no zaptel card ,so i loading ztdummy,but problem
>> appear,when i dial the number into the pbx,sometimes i can not listen to
>> the ivr ,and no rtp create. if i unload the ztdummy driver,the proble will
>> disapper. I guess may be the timer source problem, but i dont't know how
>> to solve it . anyone can give
>> me some advices will be appreciated.
>>
>> asteirsk-1.4.21 and zaptel-1.4.10
>>
>>
> So this only happens sometimes?  I'm wondering if ztdummy on your system is
> using the RTC and that the RTC interrupt is stopping on your system as in
> issue 13930 (http://issues.asterisk.org/view.php?id=13930)
>
> If RTC is in use, you could try making sure that USE_RTC is not defined in
> ztdummy.c.
>
>
> --
> Shaun Ruffell
> Digium, Inc. | Linux Kernel Developer
>
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> Check us out at: www.digium.com & www.asterisk.org
>



-- 
Best regards!
jordan pan
Location:Shenzhen China Company:www.justcall.cn
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100713/46426a76/attachment.htm