[asterisk-users] Can't dial out through AMI

[Mike Ely]

On 7/6/10 8:44 PM, "Mike Ely" <mikeely at amyskitchen.net> wrote:

> -----Original Message-----
> From:   asterisk-users-bounces at lists.digium.com on behalf of Paul Belanger
> Sent:   Tue 7/6/2010 5:10 PM
> To:     Asterisk Users Mailing List - Non-Commercial Discussion
> Cc:    
> Subject:        Re: [asterisk-users] Can't dial out through AMI
> 
> On Tue, Jul 6, 2010 at 8:00 PM, Mike Ely <mikeely at amyskitchen.net> wrote:
>> Log attached.
>> 
> <--- SIP read from UDP:10.10.10.16:5060 --->
> SIP/2.0 401 Unauthorized
> 
>> context from sip.conf:
>> 
>> [ShoreTel]
>> type=peer
>> qualify=yes
>> port=5060
>> host=10.10.10.16
>> context=incoming
>> canreinvite=no
>> 
> Your context is not setup properly for outbound, you have no
> credentials defined.
> 
> 
> None needed on the ShoreTel side and as I mentioned before regular SIP users
> can dial out through the Asterisk box using this trunk.  Keep in mind, this is
> a development system on a tightly-controlled network, and I'm trying to start
> with the simplest case possible, which includes no digest auth for the trunk
> connection.
> 

Maybe I missed something here?  SIP users configured within Asterisk can
dial out just fine through the trunk.  It's just when I try to use AMI that
it fails.