[asterisk-users] Dahdi - alarm which clears itself - Should I care ?

[Olivier]

Hi,

When reading logs, I can see a couple of lines such as :

full.6:[Jun 30 15:53:26] NOTICE[6599] chan_dahdi.c: PRI got event: Alarm (4)
on Primary D-channel of span 1
full.6:[Jun 30 15:53:32] NOTICE[6599] chan_dahdi.c: PRI got event: No more
alarm (5) on Primary D-channel of span 1
full.6:[Jun 30 15:53:32] NOTICE[6607] chan_dahdi.c: Alarm cleared on channel
1
full.6:[Jun 30 15:53:32] NOTICE[6607] chan_dahdi.c: Alarm cleared on channel
2

In a 3 BRI spans powered system, this occurred 4 times last week :  1 time
for one span, 3 times for another one.
Each time, there is a 6 seconds delay between Alarm and Alarm clearance.

My setup is:
Asterisk 1.6.1.18,
Dahdi 2.3.0 with OSLEC
Libpri 1.4.10.2
Junghanns OctoBRI with wcb4xxb driver


I'm not really worried about this but should I care ?
Suggestions ?

Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100706/626b8c1a/attachment.htm