[asterisk-users] microphone on Polycom 550/650
Michael Graves
mgraves at mstvp.com
Sat Jan 30 19:43:21 CST 2010
I have several models running; IP335, IP430, IP450 & IP60. I'm running
v3.2.1.
I don't have convenient access to the configs at the moment. But if you
download the newer firmware from Polycom their stock configs will give
you all that you need.
http://downloads.polycom.com/voice/voip/sip_sw_releases_matrix.html
Michael
--Original Message Text---
From: hin lee
Date: Sat, 30 Jan 2010 16:01:19 -0800 (PST)
Which model do you have? what version of sip are you running on the
Polycom? I am on sip 3.0.2. Can you email me your sip.cfg so I can
compare the differences?
From: Michael Graves <mgraves at mstvp.com>
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Sent: Sat, January 30, 2010 9:02:44 AM
Subject: Re: [asterisk-users] microphone on Polycom 550/650
There's no issue here. There are parameters in the Polycom config files
for the various gain settings. The headset, handset and speakerphone
volume and mic gains are all separate. They can be tweaked as you like
via the config files.
Michael
--Original Message Text---
From: hin lee
Date: Sat, 30 Jan 2010 08:37:24 -0800 (PST)
Yes, the external calls are going over DAHDI. The problem is on the
Polycom phones b/c if I pick up the handset, the other end can hear me
fine. The problem is when using the hands-free (speakerphone) instead
the handset.
Here are some similar posting of the sa
issue.
http://www.trixbox.org/forums/vendor-forums-certified/polycom/increasing
-speakerphone-tx-gain
http://www.trixbox.org/forums/vendor-moderated-forums/polycom/430-sound-
volume-gain
Most of our phones are IP 550. Where and what do I need to adjust the
setting to fix this issue? Any Polycom experts in this mailing list?
From: Danny Nicholas <danny at debsinc.com>
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Sent: Fri, January 29, 2010 10:18:29 AM
Subject: Re: [asterisk-users] microphone on Polycom 550/650
You donââ¬â¢t state this, but the assumption would be that your
external calls are DAHDI based, so you might need to tweak txgain in
dahdi.conf.
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of hin lee
Sent: Friday, January 29, 2010 12:08 PM
To: Asterisk Users
Subject: [asterisk-users] microphone on Polycom 550/650
I have quite a number of users complaining that when they are using
handsfree to talk over a landline, the other end can't hear them. It's
like the person is speaking 5 feet away and can barely hear their
voice. However between internal SIP calls, it's fine.
What could be the problem?
--
Michael Graves
mgraves<at>mstvp.com
http://www.mgraves.org
o713-861-4005
c713-201-1262
sip:mgraves at mstvp.onsip.com
skype mjgraves
Twitter mjgraves
--
Michael Graves
mgraves<at>mstvp.com
http://www.mgraves.org
o713-861-4005
c713-201-1262
sip:mgraves at mstvp.onsip.com
skype mjgraves
Twitter mjgraves
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100130/ab4fb458/attachment.htm
More information about the asterisk-users
mailing list