[asterisk-users] Caller hang up not detected

[hugolivude]

Hi,

I'm having trouble getting Dial to exit when the caller hangs up in Asterisk
1.4.21.2.

I use a POTS line to call into the DiD given to me by VOIP service
provider.  When the call comes in, I have the VOIP provider send it to
another POTS line.  All this works fine however when the caller (me) hangs
up, the Dial command does not exit.  The callee stays connected (and my
billing continues!). Dial doesn't exit until the callee hangs up. Here's a
snip from extensions.conf:

exten => 1,n,Dial(SIP/14168724765 at 6135551212-sw1|120|gtT)
exten => 1,n,Playback(vm-goodbye)

Here's the CLI output (verbosity = 4):

-- Executing [1 at Trunk-0001:1] NoOp("SIP/77.57.127.163-09023590", "") in new
stack
-- Executing [1 at Trunk-0001:2] Dial("SIP/77.57.127.163-09023590",
"SIP/14168724765 at 6135551212-sw1|120|gtT") in new stack
-- Called 14168724765 at 6135551212-sw1
-- SIP/6135551212-sw1-090275d0 is making progress passing it to
SIP/77.57.127.163-09023590
-- SIP/6135551212-sw1-090275d0 answered SIP/77.57.127.163-09023590
*** I hang up here, but the call continues.  A while later the callee hangs
up:
-- Executing [1 at Trunk-0001:3] Playback("SIP/77.57.127.163-09023590",
"vm-goodbye") in new stack
*** obviously I don't here this, just see it in the CLI

I'd be grateful for any troubleshooting tips that will help me get asterisk
to quit the Dial command when the originator hangs up.

Thanks,
H
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100121/7dbb8418/attachment.htm