[asterisk-users] No dial-tone with X101P FXO card

[Tzafrir Cohen]

On Sat, Jan 09, 2010 at 11:33:06PM -0800, Nitin Bahadur wrote:
> Hi,
> 
>   I installed a 1-port FXO on my Ubuntu 8.4. I was earlier only hearing
> a fast clicking sound and now I am not hearing any dial-tone. The FXO
> card has 2 slots: [phone | line ]. I hve connected the wall-phone-input
> to the "line" slot and "phone" to my home-phone. I do not hear any dial-tone
> on my home-phone.

Those two slots are pass-through. The card is a single-port FXO
("phone").

> 
> Asterisk seems to recognize my hardware....here are the relevant
> logs/configs:
> 
> Any help would be highly appreciated.
> 
> jserver*CLI> core show channeltypes
> Type        Description                              Devicestate
> Indications  Transfer
> ----------  -----------                              -----------
> -----------  --------
> Phone       Standard Linux Telephony API Driver      no           yes
>   no
> Local       Local Proxy Channel Driver               yes          yes
>   no
> Agent       Call Agent Proxy Channel                 yes          yes
>   no
> Zap         DAHDI Telephony Driver w/PRI             no           yes
>   no
> MGCP        Media Gateway Control Protocol (MGCP)    yes          yes
>   no
> SIP         Session Initiation Protocol (SIP)        yes          yes
>   yes
> Skinny      Skinny Client Control Protocol (Skinny)  no           yes
>   no
> 
> jserver*CLI> zap show channels
>    Chan Extension  Context         Language   MOH Interpret
> pseudo            default                    default
>       1            internal        en         default

What's the output of:

  dialplan show internal

in the asterisk CLI?
> 
> Zaptel Version: 1.4.12.1
> Echo Canceller: MG2
> Configuration
> ======================
> 
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> 
> 1 channels to configure.
> 
> 
> # dmesg | grep -i fxo
> [   43.066706] wcfxo: DAA mode is 'FCC'
> [   43.066719] Found a Wildcard FXO: Generic Clone
> 
> 
> # cat zapata.conf
> 
> [channels]
> language=en
> relaxdtmf=yes
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> usecallerid=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> ;group=0
> signalling=fxs_ks
> context=internal
> channel => 1
> 
> # cat zaptel.conf
> #
> # Zaptel Configuration File
> #
> fxsks=1
> loadzone = us
> defaultzone=us

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir