[asterisk-users] call is not going to Voicemail with "1,n"

[Joseph]

Thank you William,

It looks nice but I like the previous one you suggested, it looks simpler and it easier to follow the logic :-)

--
Joseph


On 12/30/10 01:40, William Stillwell wrote:
>Also, a more "fancy" approach
>
>[macro-dialvm]
>
>exten => s,1,NoOp("${ExTEN}|${MACRO_EXTEN}|${ARG1}")
>exten => s,n,Dial(SIP/${ARG1},25,t)
>exten => s,n,NoOp(${ARG1})
>exten => s,n,NoOp(${DIALSTATUS})
>exten => s,n,GotoIf($["${DIALSTATUS}" = "BUSY"]?BUSY)
>exten => s,n,GotoIf($["${DIALSTATUS}" = "NOANSWER"]?NOANSWER)
>exten => s,n,GotoIf($["${DIALSTATUS}" = "CHANUNAVAIL"]?CHANUNAVAIL)
>exten => s,n,VoiceMail(${ARG1},a)
>exten => s,n,MacroExit()
>
>exten => s,n(BUSY),Set(CDR(userfield)=DIAL-BUSY)
>exten => s,n,NoO${MACRO_EXTEN})
>exten => s,n,NoOp(${ARG1})
>exten => s,n,ResetCDR(w)
>exten => s,n,VoiceMail(${ARG1},b)
>exten => s,n,MacroExit()
>
>exten => s,n(NOANSWER),Set(CDR(userfield)=DIAL-NOANSWER)
>exten => s,n,NoOp(${MACRO_EXTEN})
>exten => s,n,NoOp(${ARG1})
>exten => s,n,ResetCDR(w)
>exten => s,n,VoiceMail(${ARG1},u)
>exten => s,n,MacroExit()
>
>exten => s,n(CHANUNAVAIL),Set(CDR(userfield)=DIAL-UNAVIL)
>exten => s,n,NoOp(${MACRO_EXTEN})
>exten => s,n,NoOp(${ARG1})
>exten => s,n,ResetCDR(w)
>exten => s,n,VoiceMail(${ARG1},uj)
>exten => s,n,MacroExit()
>
>exten => s,BUSY+101,Set(CDR(userfield)=DIAL-BSY-NOMBX)
>exten => s,n,NoOp(${MACRO_EXTEN})
>exten => s,n,NoOp(${ARG1})
>exten => s,n,ResetCDR(w)
>exten => s,n,NoOp("Mailbox Not found")
>exten => s,n,Goto(CHANUNAVAIL+101)
>
>exten => s,NOANSWER+101,Set(CDR(userfield)=DIAL-NA-NOMBX)
>exten => s,n,NoOp(${MACRO_EXTEN})
>exten => s,n,NoOp(${ARG1})
>exten => s,n,NoOp("MailBox Not found")
>exten => s,n,Goto(CHANUNAVAIL+101)
>
>exten => s,CHANUNAVAIL+101,Playback(/home/asterisk/gen/themailbox)
>exten => s,n,NoOp(${MACRO_EXTEN})
>exten => s,n,NoOp(${ARG1})
>exten => s,n,SayDigits(${MACRO_EXTEN})
>exten => s,n,Playback(/home/asterisk/gen/doesnotexist)
>exten => s,n,MacroExit()
>
>
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joseph
>Sent: Wednesday, December 29, 2010 11:56 PM
>To: asterisk-users at lists.digium.com
>Subject: [asterisk-users] call is not going to Voicemail with "1,n"
>
>I've tried to simplified the dial plan and use "n" instead of numbers but
>I've noticed it is not executing my voicemail if I substitute number with
>"n"
>
>In the example below when the call is not answered, it does not go to
>voicemail; call just hangup.
>
>exten => 1,1,Playback(transfer)
>exten => 1,n,Dial(${sales_support}&IAX2/iaxy-322,20,jrw)
>exten => 1,103,Voicemail(11,b)
>exten => 1,104,Hangup()
>exten => 1,n,Voicemail(11,b)             ; Right to voicemail
>exten => 1,n,Hangup()
>
>Here is the transcript:
>
>-- Executing [1 at office-open:1] Playback("SIP/pstn-5665-000000be",
>"transfer") in new stack
>-- <SIP/pstn-5665-000000be> Playing 'transfer' (language 'en')
>-- Executing [1 at office-open:2] Dial("SIP/pstn-5665-000000be",
>"SIP/11&IAX2/iaxy-322|20|jrw") in new stack
>-- Called 11
>-- Called iaxy-322
>-- Call accepted by 10.0.0.108 (format ulaw)
>-- Format for call is ulaw
>-- IAX2/iaxy-322-8406 is busy
>-- Hungup 'IAX2/iaxy-322-8406'
>-- SIP/11-000000bf is ringing
>-- Nobody picked up in 20000 ms
>   == Auto fallthrough, channel 'SIP/pstn-5665-000000be' status is
>'NOANSWER'
>
>
>However, if I number the dial plan in the old fashion way and don't answer
>the phone it goes to voicemail just fine:
>
>exten => 1,1,Playback(transfer)
>exten => 1,2,Dial(${sales_support}&IAX2/iaxy-322,20,jrw)
>exten => 1,103,Voicemail(11,b)
>exten => 1,104,Hangup()
>exten => 1,3,Voicemail(11,b)             ; Right to voicemail
>exten => 1,4,Hangup()
>
>--
>Joseph