[asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it worked!)

[Bryant Zimmerman]

Giorgio

You could buy just a couple of licenses 3 to 5. It would get rid of the 
messages for the most part and it would give you the ability to transcode 
for voicemails and other items requiring transcode.  The reason you are 
likely getting the messages is there is some kind of transcode required 
that it can't do and you are getting the warring. If you shut off all in 
the middle functions like recording, voicemail, and feature codes you may 
be able to get rid of them but you would also loose the functions.  You 
will likely waste more than the $30 to $50 dollars in time and you get the 
option to transcode to boot. Just my 2 cents.

----------------------------------------
 From: "Giorgio Incantalupo" <gincantalupo at fgasoftware.com>
Sent: Wednesday, December 22, 2010 11:17 AM
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Subject: Re: [asterisk-users] * 1.8: cannot load g729 free codec (on 1.4 it 
worked!)

Hi all,

thanks for answering.

You all are right but I do not really need the codec because my phones 
and my Voip lines are all working using g729. Asterisk is working fine 
without transcoding as well.....the problem is my CLI is flooded with 
messages like:
WARNING[7831] translate.c: No translator path from alaw to unknown
which are quite annoying...aren't they?
Should I pay to avoid a CLI message....? That doesn't sound fair to me.
I know I should report the problem but the "fake" codec seemed the 
faster way.

Giorgio Incantalupo

Giorgio Incantalupo wrote:
> pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so
> Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so
> Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed.
> [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module 
> 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license 
key.
> [Dec 22 15:52:45] WARNING[4491]: loader.c:852 load_resource: Module 
> 'codec_g729-ast14-gcc4-glibc-pentium3.so' could not be loaded.
>
> It worked on Asterisk 1.4, but not anymore on my Asterisk 
> 1.8.......why??? :(
>
> Thank you
>
> Giorgio Incantalupo
>
>
> -- 
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20101222/cca9496d/attachment.htm>