[asterisk-users] dahdi issue on digium AEX800

[Thorsten Göllner]

Am 20.12.2010 16:00, schrieb Thorsten Göllner:
>
>
> Am 20.12.2010 15:11, schrieb Shaun Ruffell:
>> On 12/20/10 6:50 AM, Max Alex wrote:
>>> Hi All,
>>> I have installed asterisk 1.6.2.8
>>> Dahdi: 2.4.0
>>> Digium card:  Digium, Inc. Wildcard AEX800 8-port analog card
>>>
>>> I have configured this card properly and it is working for calls too,
>>> But there is issue of one way audio on this outbound routes only,
>>> My voice is going to outside pstn number but i am not able to get their
>>> audio,
>>> I have disabled firewall, selinux is also off.
>>
>> First off, my recommendation is for you to contact Digium technical 
>> support.  They will be able to help you triage and resolve this.
>>
>> That being said, some questions that come to mind looking at your 
>> description:
>>
>> 1) Is the one-way audio constant or intermittent?  Does it affect all 
>> calls through the card or only "outbound routes"?
>>
>> 2) Do you have a VPM module installed on the card?  If so, does 
>> loading the card with "modprobe wctdm24xxp vpmsupport=0" change the 
>> behavior at all?
>>
>> 3) Is there anything strange you see in the output of the "dmesg" 
>> command?
>>
>> 4) Are you able to install and try the current trunk of DAHDI?  Does 
>> that change what you see?
>>
>> Cheers,
>> Shaun
>>
>
> Please show us

Ups, last line was cut. Please show us:
cat /etc/asterisk/chan_dahdi.conf | grep overlapdial