[asterisk-users] setting up callerid

[dave george]

When I call from a mobile to mobile (both registered on OPENBTS) the correct
caller ID is passed.  That is the callerid that I set in the callerid=
field.

When calling from openbts to the PSTN the config header is passed.

Thanks,
Dave

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Axelle
Sent: Friday, December 17, 2010 10:49 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] setting up callerid

Hi Dave,


On Thu, Dec 16, 2010 at 1:52 PM, dave george <dgeorge at teletoneinc.com>
wrote:
> Tried the following but no luck:
>
> exten => _53.,1,Set(CALLERID(num)=4735202222)
>
> exten => _53.,n,Dial(SIP/${EXTEN}@SS74)
>
> I am still passing IMSI310410381554227 as the CALLERID.
>
> My peer is setup as follows:
>
> [IMSI310410381554227]
>
> canreinvite=no
>
> type=peer
>
> context=openbts
>
> callerid=4735202222

I see you are using OpenBTS. To my understanding, OpenBTS does not
support caller ID, so I don't think it can work.
But as I have the same issue as you, I'd be glad to be wrong ! :D Let me
know.

Regards

Axelle

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users