[asterisk-users] HA8 cards and RED alarm

[Olivier]

2010/12/5 Administrator TOOTAI <admin at tootai.net>

> Hi,
>
> I have 2 servers: one is running 2 B410P cards with 8 euroisdn lines
> (mISDN) connected on it, everything runs fine.
>
> I prepare a new server - HP 360 G8- with 2 HA8 cards each of them 1
> module of 4 lines. Already had with this machine an RMA on both cards as
> they was faulty and crashed the server.
>
> What happends is that when I connect cables on the HA8 modules (those
> cables are unpluged from working server and connected to the new one)
> nothing happend on the dahdi status, alarm is RED. Two days ago one
> cable changed his staus to YELLOW (?) and then became again RED.
>
> Below are relevant outputs. I created those config files with one of the
> previous card which worked a short time and it was OK.
>
> Could it be possible that modules have also to go for RMA?
>
> Thanks for any hint.
>
> SrvPhone2:/etc/asterisk# cat chan_dahdi.conf
> ;
> ; DAHDI telephony interface
> ;
> ; Configuration file
> ;
> ; You need to restart Asterisk to re-configure the DAHDI channels
> ; CLI> reload chan_dahdi.so
> ;               will reload the configuration file,
> ;               but not all configuration options are
> ;               re-configured during a reload.
>
>
>
> [channels]
> ;
> ; Default language
> ;
> language=fr
> ;
> ; Default context
> ;
> context=isdn
> internationalprefix = 00
> nationalprefix = 0
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> switchtype=euroisdn
>
> ;
> ; Allow call parking
> ; ('canpark=no' is overridden by 'transfer=yes')
> ;
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> ;
> ; If you are having trouble with DTMF detection, you can relax the DTMF
> ; detection parameters.  Relaxing them may make the DTMF detector more
> likely
> ; to have "talkoff" where DTMF is detected when it shouldn't be.
> ;
> ;relaxdtmf=yes
> ;
> ; You may also set the default receive and transmit gains (in dB)
> ;
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
> immediate=no
> ; This feature can also easily detect false hangups. The symptoms of this
> is
> ; being disconnected in the middle of a call for no reason.
> ;
> callprogress=yes
> progzone=be
>
> ; For fax detection, uncomment one of the following lines.  The default
> is *OFF*
> ; We use NVFaxDetect stuff for this
> ;
> ;faxdetect=both
> ;faxdetect=incoming
> ;faxdetect=outgoing
> ;faxdetect=no
>
> group=1
> signalling=bri_cpe
> context=isdn
> channel => 1,2,4,5,7,8,10,11,13,14,16,17,19,20,22,23
>
>
>
>
>
> SrvPhone2:/etc/dahdi# cat system.conf
> loadzone = be
> defaultzone = be
>
> span = 1,1,0,ccs,ami
> bchan = 1,2
> hardhdlc = 3
>
> span = 2,2,0,ccs,ami
> bchan = 4,5
> hardhdlc = 6
>
> span = 3,3,0,ccs,ami
> bchan = 7,8
> hardhdlc = 9
>
> span = 4,4,0,ccs,ami
> bchan = 10,11
> hardhdlc = 12
>
> span = 5,5,0,ccs,ami
> bchan = 13,14
> hardhdlc=15
>
> span = 6,6,0,ccs,ami
> bchan = 16,17
> hardhdlc = 18
>
> span = 7,7,0,ccs,ami
> bchan = 19,20
> hardhdlc = 21
>
> span = 8,8,0,ccs,ami
> bchan = 22,23
> hardhdlc = 24
>
>
>
> SrvPhone2*CLI> dahdi show status
> Description                              Alarms  IRQ    bpviol CRC4
> Fra Codi Options  LBO
> HB8-0000 Board 1                         RED     0      0      0
> CCS AMI           0 db (CSU)/0-133 feet (DSX-1)
> HB8-0000 Board 1                         RED     0      0      0
> CCS AMI           0 db (CSU)/0-133 feet (DSX-1)
> HB8-0000 Board 1                         RED     0      0      0
> CCS AMI           0 db (CSU)/0-133 feet (DSX-1)
> HB8-0000 Board 1                         RED     0      0      0
> CCS AMI           0 db (CSU)/0-133 feet (DSX-1)
> HB8-0000 Board 2                         RED     0      0      0
> CCS AMI           0 db (CSU)/0-133 feet (DSX-1)
> HB8-0000 Board 2                         RED     0      0      0
> CCS AMI           0 db (CSU)/0-133 feet (DSX-1)
> HB8-0000 Board 2                         RED     0      0      0
> CCS AMI           0 db (CSU)/0-133 feet (DSX-1)
> HB8-0000 Board 2                         RED     0      0      0
> CCS AMI           0 db (CSU)/0-133 feet (DSX-1)
>
> --
> Daniel
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

Which Dahdi version ?
I had to use latest trunk to have mine working.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101205/8b21425c/attachment.htm