[asterisk-users] DAHDI on VMWARE

[Danny Nicholas]

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Shaun Ruffell
Sent: Thursday, December 02, 2010 4:48 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] DAHDI on VMWARE

> There is a comment in this post (from 2010-03-14) where someone claims
> that only certain devices are supported in pass-through:
> 
> http://communities.vmware.com/message/1493624#1493624
> 
>>> What is the dmesg output when the wctdm24xxp driver is loaded on
>>> this system?
>> 
>> [77901.847781] wctdm24xxp 0000:13:00.0: PCI INT A -> GSI 16 (level,
>> >low) -> IRQ 16
>> [77901.847796] wctdm24xxp 0000:13:00.0: IO Registers
>> are in use by another module. [77901.847807] wctdm24xxp 0000:13:00.0:
>> PCI INT A disabled [77901.847816] wctdm24xxp: probe of 0000:13:00.0
>> failed with error -5

Could you update to the lastest version of DAHDI-linux and try:
]# modprobe wctdm24xxp debug=1

and give me the dmesg output?

I think the IO registers being in use is a side effect of a previous
failed load.  I just committed 9503 [1] to bypass that check.

[1] http://svn.asterisk.org/view/dahdi?view=revision&revision=9503


Thanks,
Shaun

[77861.878126] No iBFT detected.
[77901.847781] wctdm24xxp 0000:13:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[77901.847796] wctdm24xxp 0000:13:00.0: IO Registers are in use by another
module.
[77901.847807] wctdm24xxp 0000:13:00.0: PCI INT A disabled
[77901.847816] wctdm24xxp: probe of 0000:13:00.0 failed with error -5