[asterisk-users] Dahdi 2.4.0 and unplugged spans [SOLVED]

[Olivier]

2010/12/1 Shaun Ruffell <sruffell at digium.com>

> On 12/01/2010 11:00 AM, Shaun Ruffell wrote:
> > On 12/01/2010 09:56 AM, Olivier wrote:
> >> I'm facing an issue with which loading wctdm24xxp module fails.
> >> [   33.527942] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive
> frame.
> >> [   33.527995] wctdm24xxp 0000:01:0b.0: The firmware may be corrupted.
> >> Please completely power off your system, power on, and then reload th
> >> e driver with the 'forceload' module parameter set to 1 to attempt
> recovery.
> >> [   33.544741] ACPI: PCI interrupt for device 0000:01:0b.0 disabled
> >> [   33.544757] wctdm24xxp: probe of 0000:01:0b.0 failed with error -5
> >
> > The essential thing here is that your Hx8 board doesn't appear to be
> > responding.  I've seen certain systems where revision 9397 [1] works
> > around cases like what you're seeing.  If that doesn't help your best
> > bet is to contact Digium technical support for help with troubleshooting.
> >
> > [1] http://svn.asterisk.org/view/dahdi?view=revision&revision=9397
> >
>
> I forgot to add, please update to the current trunk and retry as opposed
> to checking out revision 9397 specifically.
>
> ]# svn co http://svn.asterisk.org/svn/dahdi/linux/trunk dahdi-linux-trunk
> ]# cd dahdi-linux-trunk
> ]# make install
>
> --
> Shaun Ruffell
> Digium, Inc. | Linux Kernel Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> Check us out at: www.digium.com & www.asterisk.org
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

Hi,

I tried using revision 9507 (which currently matches trunk). At first, I
still got the same errors in dmesg but, after a reboot, it seems to pass !
(The dark side of things is I still don't understand how to write a dahdi
installation script which could run without rebooting but that's another
story).

Anyway this thread topic was to check if I needed a live PSTN connection to
configure this HA8 board and the answer is no.

Thanks for helping
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101202/9dfe6f99/attachment.htm