[asterisk-users] Dahdi install gone wrong

[Doug Dawson]

Todd
To interface directly with the telco pots lines You should be using FXS modules with FXS signaling.

Doug D
  ----- Original Message ----- 
  From: Todd Reese 
  To: asterisk-users at lists.digium.com 
  Sent: Monday, August 23, 2010 9:33 AM
  Subject: Re: [asterisk-users] Dahdi install gone wrong


  They are FXO modules and yes, the lines are coming in from the telco.

  On 8/23/2010 12:05 PM, Doug Dawson wrote: 

    The card you installed has FXO or FXS modules in it ????? are you getting your lines directly from the telco co???


    Doug D


    On Mon 23/08/10 8:37 AM , Cassius Smith cassius at cassius.org sent:

      * -----Original Message-----
      * From: Todd Reese <treese65 at gmail.com>
      * Reply-to: Asterisk Users Mailing List - Non-Commercial
      Discussion <asterisk-users at lists.digium.com>
      * To: asterisk-users at lists.digium.com
      * Subject: [asterisk-users] Dahdi install gone wrong
      * Date: Mon, 23 Aug 2010 10:26:58 -0400
      * 
      * Hi All,
      * 
      * 
      * I've got a project installing a Digium TDM800P card with 8 FXO's
      in an 
      * Asterisk box.
      * 
      * 
      * The computer is running Slackware 13.1 and I've installed the
      current 
      * Dahdi and Asterisk 1.6.2.11.
      * 
      * 
      * I've installed several boxes that are pure VOIP but, I haven't
      installed 
      * a Dahdi interface and I'm stumped. I've got it to the point of
      Dahdi 
      * seeing the card and Asterisk recognizing dahdi but, I can't see
      any 
      * channels for the calls to come in on.
      * 
      * I've had to borrow files from an old config of Trixbox (the
      machine was 
      * underpowered) to get to the point where I am in my setup.
      * 
      * I would like to inquire some help from the group to get me up
      and 
      * receiving calls on the card.
      * 
      * 
      * Regards,
      * 
      * Todd Reese
      * 
      * Include:
      * 
      * 
      * ============chan_dahdi.conf==========
      * 
      * 
      * ; Configuration file
      * 
      * [trunkgroups]
      * 
      * [channels]
      * 
      * language=en
      * context=from-zaptel
      * signalling=fxs_ks
      * rxwink=300 ; Atlas seems to use long (250ms) winks
      * ;
      * ; Whether or not to do distinctive ring detection on FXO lines
      * ;
      * ;usedistinctiveringdetection=yes
      * 
      * usecallerid=yes
      * hidecallerid=no
      * callwaiting=yes
      * usecallingpres=yes
      * callwaitingcallerid=yes
      * threewaycalling=yes
      * transfer=yes
      * cancallforward=yes
      * callreturn=yes
      * echocancel=yes
      * echocancelwhenbridged=no
      * ;echotraining=800
      * rxgain=0.0
      * txgain=0.0
      * group=0
      * callgroup=1
      * pickupgroup=1
      * immediate=no
      * 
      * ;faxdetect=both
      * faxdetect=incoming
      * ;faxdetect=outgoing
      * ;faxdetect=no
      * 
      * ;Include setup-pstn configs
      * #include dahdi-channels.conf
      * 
      * group=1
      * 
      * ;Include PBXconfig configs
      * #include chan_dahdi_additional.conf
      * 
      * 
      * 
      * ============dahdi-channels.conf=============
      * 
      * ; Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 18
      20:25:02 2010
      * ; If you edit this file and execute /usr/sbin/dahdi_genconf
      again,
      * ; your manual changes will be LOST.
      * ; Dahdi Channels Configurations (chan_dahdi.conf)
      * ;
      * ; This is not intended to be a complete chan_dahdi.conf. Rather,
      it is 
      * intended
      * ; to be #include-d by /etc/chan_dahdi.conf that will include the
      global 
      * settings
      * ;
      * 
      * ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
      * ;;; line="1 WCTDM/0/0 FXSKS (SWEC: MG2)"
      * signalling=fxs_ks
      * callerid=asreceived
      * group=0
      * context=from-pstn
      * channel => 1
      * callerid=
      * group=
      * context=default
      * 
      * ;;; line="2 WCTDM/0/1 FXSKS (SWEC: MG2)"
      * signalling=fxs_ks
      * callerid=asreceived
      * group=0
      * context=from-pstn
      * channel => 2
      * callerid=
      * group=
      * context=default
      * 
      * ;;; line="3 WCTDM/0/2 FXSKS (SWEC: MG2)"
      * signalling=fxs_ks
      * callerid=asreceived
      * group=0
      * context=from-pstn
      * channel => 3
      * callerid=
      * group=
      * context=default
      * 
      * ;;; line="4 WCTDM/0/3 FXSKS (SWEC: MG2)"
      * signalling=fxs_ks
      * callerid=asreceived
      * group=0
      * context=from-pstn
      * channel => 4
      * callerid=
      * group=
      * context=default
      * 
      * ;;; line="5 WCTDM/0/4 FXSKS (SWEC: MG2)"
      * signalling=fxs_ks
      * callerid=asreceived
      * group=0
      * context=from-pstn
      * channel => 5
      * callerid=
      * group=
      * context=default
      * 
      * ;;; line="6 WCTDM/0/5 FXSKS (SWEC: MG2)"
      * signalling=fxs_ks
      * callerid=asreceived
      * group=0
      * context=from-pstn
      * channel => 6
      * callerid=
      * group=
      * context=default
      * 
      * ;;; line="7 WCTDM/0/6 FXSKS (SWEC: MG2)"
      * signalling=fxs_ks
      * callerid=asreceived
      * group=0
      * context=from-pstn
      * channel => 7
      * callerid=
      * group=
      * context=default
      * 
      * ;;; line="8 WCTDM/0/7 FXSKS (SWEC: MG2)"
      * signalling=fxs_ks
      * callerid=asreceived
      * group=0
      * context=from-pstn
      * channel => 8
      * callerid=
      * group=
      * context=default
      * 
      * 
      * =====system.conf=============
      * 
      * 
      * # Autogenerated by /usr/sbin/dahdi_genconf on Sun Aug 22
      19:34:02 2010
      * # If you edit this file and execute /usr/sbin/dahdi_genconf
      again,
      * # your manual changes will be LOST.
      * # Dahdi Configuration File
      * #
      * # This file is parsed by the Dahdi Configurator, dahdi_cfg
      * #
      * # Global data
      * 
      * loadzone = us
      * defaultzone = us
      * 
      * # Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
      * fxsks=1
      * #echocanceller=mg2,1
      * fxsks=2
      * #echocanceller=mg2,2
      * fxsks=3
      * #echocanceller=mg2,3
      * fxsks=4
      * #echocanceller=mg2,4
      * fxsks=5
      * #echocanceller=mg2,5
      * fxsks=6
      * #echocanceller=mg2,6
      * fxsks=7
      * #echocanceller=mg2,7
      * fxsks=8
      * #echocanceller=mg2,8


      Can you include the germane part of the dialplan also?



      -- 
      _____________________________________________________________________
      -- Bandwidth and Colocation Provided by http://www.api-digital.com">http://www.api-digital.com --
      New to Asterisk? Join us for a live introductory webinar every Thurs:
      http://www.asterisk.org/hello">http://www.asterisk.org/hello

      asterisk-users mailing list
      To UNSUBSCRIBE or update options visit:
      http://lists.digium.com/mailman/listinfo/asterisk-users">http://lists.digium.com/mailman/listinfo/asterisk-users




----------------------------------------------------------------------------
    Msg sent via High Desert Internet Webmail - http://www.hdiss.net




------------------------------------------------------------------------------


  -- 
  _____________________________________________________________________
  -- Bandwidth and Colocation Provided by http://www.api-digital.com --
  New to Asterisk? Join us for a live introductory webinar every Thurs:
                 http://www.asterisk.org/hello

  asterisk-users mailing list
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100825/5c21050b/attachment-0001.htm