[asterisk-users] Dahdi install gone wrong
Todd Reese
treese65 at gmail.com
Mon Aug 23 11:45:25 CDT 2010
I've made the system work by overlaying the old trixbox config in
/etc/asterisk. BUT this is a disaster waiting to happen with this client.
I'm having a hard time deciphering the trixbox extensions*.conf files in
order to make a simple system where the client won't muck it up.
On 8/23/2010 11:37 AM, Cassius Smith wrote:
> * -----Original Message-----
> * From: Todd Reese<treese65 at gmail.com>
> * Reply-to: Asterisk Users Mailing List - Non-Commercial
> Discussion<asterisk-users at lists.digium.com>
> * To: asterisk-users at lists.digium.com
> * Subject: [asterisk-users] Dahdi install gone wrong
> * Date: Mon, 23 Aug 2010 10:26:58 -0400
> *
> * Hi All,
> *
> *
> * I've got a project installing a Digium TDM800P card with 8 FXO's
> in an
> * Asterisk box.
> *
> *
> * The computer is running Slackware 13.1 and I've installed the
> current
> * Dahdi and Asterisk 1.6.2.11.
> *
> *
> * I've installed several boxes that are pure VOIP but, I haven't
> installed
> * a Dahdi interface and I'm stumped. I've got it to the point of
> Dahdi
> * seeing the card and Asterisk recognizing dahdi but, I can't see
> any
> * channels for the calls to come in on.
> *
> * I've had to borrow files from an old config of Trixbox (the
> machine was
> * underpowered) to get to the point where I am in my setup.
> *
> * I would like to inquire some help from the group to get me up
> and
> * receiving calls on the card.
> *
> *
> * Regards,
> *
> * Todd Reese
> *
> * Include:
> *
> *
> * ============chan_dahdi.conf==========
> *
> *
> * ; Configuration file
> *
> * [trunkgroups]
> *
> * [channels]
> *
> * language=en
> * context=from-zaptel
> * signalling=fxs_ks
> * rxwink=300 ; Atlas seems to use long (250ms) winks
> * ;
> * ; Whether or not to do distinctive ring detection on FXO lines
> * ;
> * ;usedistinctiveringdetection=yes
> *
> * usecallerid=yes
> * hidecallerid=no
> * callwaiting=yes
> * usecallingpres=yes
> * callwaitingcallerid=yes
> * threewaycalling=yes
> * transfer=yes
> * cancallforward=yes
> * callreturn=yes
> * echocancel=yes
> * echocancelwhenbridged=no
> * ;echotraining=800
> * rxgain=0.0
> * txgain=0.0
> * group=0
> * callgroup=1
> * pickupgroup=1
> * immediate=no
> *
> * ;faxdetect=both
> * faxdetect=incoming
> * ;faxdetect=outgoing
> * ;faxdetect=no
> *
> * ;Include setup-pstn configs
> * #include dahdi-channels.conf
> *
> * group=1
> *
> * ;Include PBXconfig configs
> * #include chan_dahdi_additional.conf
> *
> *
> *
> * ============dahdi-channels.conf=============
> *
> * ; Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 18
> 20:25:02 2010
> * ; If you edit this file and execute /usr/sbin/dahdi_genconf
> again,
> * ; your manual changes will be LOST.
> * ; Dahdi Channels Configurations (chan_dahdi.conf)
> * ;
> * ; This is not intended to be a complete chan_dahdi.conf. Rather,
> it is
> * intended
> * ; to be #include-d by /etc/chan_dahdi.conf that will include the
> global
> * settings
> * ;
> *
> * ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
> * ;;; line="1 WCTDM/0/0 FXSKS (SWEC: MG2)"
> * signalling=fxs_ks
> * callerid=asreceived
> * group=0
> * context=from-pstn
> * channel => 1
> * callerid=
> * group=
> * context=default
> *
> * ;;; line="2 WCTDM/0/1 FXSKS (SWEC: MG2)"
> * signalling=fxs_ks
> * callerid=asreceived
> * group=0
> * context=from-pstn
> * channel => 2
> * callerid=
> * group=
> * context=default
> *
> * ;;; line="3 WCTDM/0/2 FXSKS (SWEC: MG2)"
> * signalling=fxs_ks
> * callerid=asreceived
> * group=0
> * context=from-pstn
> * channel => 3
> * callerid=
> * group=
> * context=default
> *
> * ;;; line="4 WCTDM/0/3 FXSKS (SWEC: MG2)"
> * signalling=fxs_ks
> * callerid=asreceived
> * group=0
> * context=from-pstn
> * channel => 4
> * callerid=
> * group=
> * context=default
> *
> * ;;; line="5 WCTDM/0/4 FXSKS (SWEC: MG2)"
> * signalling=fxs_ks
> * callerid=asreceived
> * group=0
> * context=from-pstn
> * channel => 5
> * callerid=
> * group=
> * context=default
> *
> * ;;; line="6 WCTDM/0/5 FXSKS (SWEC: MG2)"
> * signalling=fxs_ks
> * callerid=asreceived
> * group=0
> * context=from-pstn
> * channel => 6
> * callerid=
> * group=
> * context=default
> *
> * ;;; line="7 WCTDM/0/6 FXSKS (SWEC: MG2)"
> * signalling=fxs_ks
> * callerid=asreceived
> * group=0
> * context=from-pstn
> * channel => 7
> * callerid=
> * group=
> * context=default
> *
> * ;;; line="8 WCTDM/0/7 FXSKS (SWEC: MG2)"
> * signalling=fxs_ks
> * callerid=asreceived
> * group=0
> * context=from-pstn
> * channel => 8
> * callerid=
> * group=
> * context=default
> *
> *
> * =====system.conf=============
> *
> *
> * # Autogenerated by /usr/sbin/dahdi_genconf on Sun Aug 22
> 19:34:02 2010
> * # If you edit this file and execute /usr/sbin/dahdi_genconf
> again,
> * # your manual changes will be LOST.
> * # Dahdi Configuration File
> * #
> * # This file is parsed by the Dahdi Configurator, dahdi_cfg
> * #
> * # Global data
> *
> * loadzone = us
> * defaultzone = us
> *
> * # Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
> * fxsks=1
> * #echocanceller=mg2,1
> * fxsks=2
> * #echocanceller=mg2,2
> * fxsks=3
> * #echocanceller=mg2,3
> * fxsks=4
> * #echocanceller=mg2,4
> * fxsks=5
> * #echocanceller=mg2,5
> * fxsks=6
> * #echocanceller=mg2,6
> * fxsks=7
> * #echocanceller=mg2,7
> * fxsks=8
> * #echocanceller=mg2,8
>
>
> Can you include the germane part of the dialplan also?
>
>
>
More information about the asterisk-users
mailing list