[asterisk-users] How to determine which party hangup the call? cause of Hang-up needed.‏

[Faisal Hanif]

  Hi,

Your dial-plan could be like this,

here you will dial
EXTEN => _X,1,NoOp
EXTEN => _X,n,Set(WHOHAVEHANGED=CALLER)
EXTEN => _X,n,Dial(ZAP/xyz)
if caller hanged below line will never be executed because control will 
go to h extension.
EXTEN => _X,n,Set(WHOHAVEHANGED=CALEE)


EXTEN => h,1,NoOp(${WHOHAVEHANGED} have hanged the call reason is  
${HANGUPCAUSE})

Regards,

Faisal Hanif

On 8/12/2010 12:29 AM, bruce bruce wrote:
> Sorry, I am not following:
>
> */"/**/read the value of var ${HANGUPCAUSE} next line to dial command."/*
> */
> /*
> */Where is that value? Next to dial you mean right when the call was 
> placed? or check next few lines to find HANGUP cause?/*
> */
> /*
> */Note: This is using ZAP (analogue) and not PRI./*
> */
> /*
> */Thanks,/*
> */Bruce
> /*
> On Wed, Aug 11, 2010 at 12:33 AM, Faisal Hanif <faisal at vopium.com 
> <mailto:faisal at vopium.com>> wrote:
>
>     read the value of var ${HANGUPCAUSE} next line to dial command.
>
>     Regards,
>
>     Faisal Hanif
>     /VoIP Manager
>     /**Vopium A/S
>
>     On 8/10/2010 9:51 PM, bruce bruce wrote:
>>
>>     Hi Everyone
>>
>>     Asterisk 1.4.33 is running with Sangoma/Dahdi for analogue lines
>>     to Bell Canada.
>>
>>     User claims that call hangup without any interferance to the
>>     phone set.
>>
>>     Is there ANYWAY to find out which party hang-up the call or if
>>     the call was cut-off due to other reasons?
>>
>>     I checked the *"asteriskcdrb"* table and it's pretty much useless
>>     in this case as it only logs the duration and other properties
>>     but not cause of the Hangup.
>>
>>
>>      /var/log/asterisk/full
>>
>>     [Jul 10 10:37:02] VERBOSE[29366] logger.c:   == Manager 'admin'
>>     logged off from 127.0.0.1
>>     [Jul 10 10:37:09] VERBOSE[29348] logger.c:     -- Executing
>>     [h at macro-dialout-trunk:1] Macro("SIP/1007-0000069a",
>>     "hangupcall|") in new stack
>>     [Jul 10 10:37:09] VERBOSE[29348] logger.c:     -- Executing
>>     [s at macro-hangupcall:1] GotoIf("SIP/1007-0000069a", "1?skiprg") in
>>     new stack
>>     [Jul 10 10:37:09] VERBOSE[29348] logger.c:     -- Goto
>>     (macro-hangupcall,s,4)
>>
>>
>>     Thanks,
>>
>>     Bruce
>>
>
>     --
>     _____________________________________________________________________
>     -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>     New to Asterisk? Join us for a live introductory webinar every Thurs:
>     http://www.asterisk.org/hello
>
>     asterisk-users mailing list
>     To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100812/8c7626a5/attachment.htm