[asterisk-users] PRI - Native ZAP bridge fails - Is this my patch?

[Klaus Darilion]

The disconnect is RECEIVED by Asterisk. So there is a problem with the 
other party.

You are sending FACILITY - maybe the other party does not like FACILITY 
and hangs up.

IIRC there is a setting in zapata.conf to enable/disable FACILITY.

regards
klaus

Am 10.04.2010 21:46, schrieb bruce bruce:
> Hi Guys,
>
> I am calling out 416-999-1111 on Channel 1 of PRI and then calling
> 416-999-2222 on Channel 2 of PRI. When the two channels are going to be
> ZAP native bridged, both channels hangup and CLI show PRI cause (16).
>
> Asterisk Verbose *(Channel 1 already connected to party)*:
>      -- Requested transfer capability: 0x00 - SPEECH
>      -- Called g0/4169992222
>      -- Zap/2-1 is proceeding passing it to Zap/1-1
>      -- Zap/2-1 is ringing
>      -- Zap/2-1 answered Zap/1-1
>      -- Native bridging Zap/1-1 and Zap/2-1
>      -- Channel 0/1, span 1 got hangup request, cause 16
>      -- Hungup 'Zap/2-1'
>    == Spawn extension (zap-bridge, s, 8) exited non-zero on 'Zap/1-1'
>      -- Hungup 'Zap/1-1'
>
> Here is PRI debug, starting just before Channel two is connected until
> both channels are disconnected *(maybe FACILITY 98 is of interest?!)*:
>
> < Message type: CONNECT (7)
> q931.c:3626 q931_receive: call 32865 on channel 2 enters state 10 (Active)
>  > Protocol Discriminator: Q.931 (8)  len=5
>  > Call Ref: len= 2 (reference 97/0x61) (Originator)
>  > Message type: CONNECT ACKNOWLEDGE (15)
>      -- Zap/2-1 answered Zap/1-1
>      -- Native bridging Zap/1-1 and Zap/2-1
>  > Protocol Discriminator: Q.931 (8)  len=27
>  > Call Ref: len= 2 (reference 96/0x60) (Originator)
>  > Message type: FACILITY (98)
>  > [1c 14 91 a1 11 02 01 06 06 07 2a 86 48 ce 15 00 08 30 03 02 01 61]
>  > Facility (len=22, codeset=0) [ 0x91, 0xA1, 0x11, 0x02, 0x01, 0x06,
> 0x06, 0x07, '*', 0x86, 'H', 0xCE, 0x15, 0x00, 0x08, '0', 0x03, 0x02,
> 0x01, 'a' ]
> PROTOCOL 11
> A1 0011 (CONTEXT SPECIFIC [1])
>    02 0001 06 (INTEGER: 6)
>    06 0007 2A 86 48 CE 15 00 08 (OBJECTIDENTIFIER: 2a 86 48 ce 15 00 08)
>    30 0003 (SEQUENCE)
>      02 0001 61 (INTEGER: 97)
> < Protocol Discriminator: Q.931 (8)  len=9
> < Call Ref: len= 2 (reference 96/0x60) (Terminator)
> < Message type: DISCONNECT (69)
> < [08 02 80 90]
> < Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0
>   Location: User (0)
> <                  Ext: 1  Cause: Normal Clearing (16), class = Normal
> Event (1) ]
> -- Processing IE 8 (cs0, Cause)
> q931.c:3826 q931_receive: call 32864 on channel 1 enters state 12
> (Disconnect Indication)
>      -- Channel 0/1, span 1 got hangup request, cause 16
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate
> Connect Request
> q931.c:3015 q931_disconnect: call 32865 on channel 2 enters state 11
> (Disconnect Request)
>  > Protocol Discriminator: Q.931 (8)  len=9
>  > Call Ref: len= 2 (reference 97/0x61) (Originator)
>  > Message type: DISCONNECT (69)
>  > [08 02 81 90]
>  > Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0
>   Location: Private network serving the local user (1)
>  >                  Ext: 1  Cause: Normal Clearing (16), class = Normal
> Event (1) ]
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
> peerstate Disconnect Request
> q931.c:2967 q931_release: call 32864 on channel 1 enters state 19
> (Release Request)
>  > Protocol Discriminator: Q.931 (8)  len=9
>  > Call Ref: len= 2 (reference 96/0x60) (Originator)
>  > Message type: RELEASE (77)
>  > [08 02 81 90]
>  > Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0
>   Location: Private network serving the local user (1)
>  >                  Ext: 1  Cause: Normal Clearing (16), class = Normal
> Event (1) ]
>      -- Hungup 'Zap/1-1'
> < Protocol Discriminator: Q.931 (8)  len=5
> < Call Ref: len= 2 (reference 96/0x60) (Terminator)
> < Message type: RELEASE COMPLETE (90)
> q931.c:3766 q931_receive: call 32864 on channel 1 enters state 0 (Null)
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> < Protocol Discriminator: Q.931 (8)  len=5
> < Call Ref: len= 2 (reference 97/0x61) (Terminator)
> < Message type: RELEASE (77)
> q931.c:3801 q931_receive: call 32865 on channel 2 enters state 0 (Null)
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release
> Request
>  > Protocol Discriminator: Q.931 (8)  len=9
>  > Call Ref: len= 2 (reference 97/0x61) (Originator)
>  > Message type: RELEASE COMPLETE (90)
>  > [08 02 81 90]
>  > Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0
>   Location: Private network serving the local user (1)
>  >                  Ext: 1  Cause: Normal Clearing (16), class = Normal
> Event (1) ]
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
>
>
> System Info:
> *Bell Canada PRI*
> *Asterisk 1.4.21.2 *
> *Lib PRI 1.4.10*
>
> Is this my patch?
> https://issues.asterisk.org/view.php?id=7494
>
>
> Thanks,
> Bruce
>