[asterisk-users] IAX Problem

[Steve Edwards]

On Tue, 6 Apr 2010, bob gailer wrote:

> I have2 Trixbox Servers. Each has an IAX trunks to the other. One works
> the other fails:
>
>     -- Executing [s at macro-dialout-trunk:19] Dial("SIP/526-09eec7c8",
> "IAX2/InterOffice/210,300,tr") in new stack
>     -- Called InterOffice/210
>     -- Hungup 'IAX2/InterOffice-7578'
>   == Everyone is busy/congested at this time (1:0/0/1)
>
> The only difference I am aware of is that one server has a public IP
> address, the other is behind a NAT.
>
> The trunk from the server with the public address works fine.
>
> I added nat=yes to the other's peer details - did not help.
>
> What should I do?

0) Use a more descriptive subject.

1) Set "auth=plaintext" (only for the duration of the debug session) and 
enable iax2 debugging on the CLI.

You should see the "NEW" request and the passwords in plaintext.

Verify the username, password, context, and extension all exist.

2) Reply with the sanitized console output.

-- 
Thanks in advance,
-------------------------------------------------------------------------
Steve Edwards       sedwards at sedwards.com      Voice: +1-760-468-3867 PST
Newline                                              Fax: +1-760-731-3000