[asterisk-users] Problem with Sangoma A104 and euroisdn pri

[James Lamanna]

On Thu, Apr 1, 2010 at 6:15 AM, Jaap Winius <jwinius at umrk.to> wrote:

[snip]


>
> Besides the above error, I also noticed this:
>
>    CLI> pri show span 1
>    Primary D-channel: 16
>    Status: Provisioned, Down, Active
>    Switchtype: EuroISDN
>    Type: CPE
>    Window Length: 0/7
>    Sentrej: 0
>    SolicitFbit: 0
>    Retrans: 0
>    Busy: 0
>    Overlap Dial: 0
>    T200 Timer: 1000
>    T203 Timer: 10000
>    T305 Timer: 30000
>    T308 Timer: 4000
>    T309 Timer: -1
>    T313 Timer: 4000
>    N200 Counter: 3
>
> The status needs to be "Provisioned, Up, Active."
>
> Following Sangoma's instructions for debugging an Asterisk PRI span, I
> can confirm that there are only outgoing frames and that the D-channel
> messages in Asterisk are the same as what the Wanpipe drivers are
> seeing. So, assuming that my local telco (KPN Telecom) has activated
> the D-channel, what else could possibly be causing this problem?
>

I would call KPN Telecom and ask them for help as well.
They will have much more sophisticated tools for debugging PRIs and also will
be able to check on their end if they see the D-Channel as up.

-- James