[asterisk-users] Problem with Sangoma A104 and euroisdn pri

[Jaap Winius]

Quoting RESEARCH <research at businesstz.com>:

> Can you post outputs for the following commands;
>
> #asterisk -rx 'pri show spans'
> #asterisk -rx 'zap show channels'
> #wanpipemon -i w1g1 -c Ta

Sure thing! Here they are in succession:

==========================================================

# asterisk -rx 'pri show spans'
PRI span 1/0: Provisioned, Down, Active
# asterisk -rx 'zap show channels'
    Chan Extension  Context         Language   MOH Interpret
  pseudo            default                    default
       1            default                    default
       2            default                    default
       3            default                    default
       4            default                    default
       5            default                    default
       6            default                    default
       7            default                    default
       8            default                    default
       9            default                    default
      10            default                    default
      11            default                    default
      12            default                    default
      13            default                    default
      14            default                    default
      15            default                    default
      17            default                    default
      18            default                    default
      19            default                    default
      20            default                    default
      21            default                    default
      22            default                    default
      23            default                    default
      24            default                    default
      25            default                    default
      26            default                    default
      27            default                    default
      28            default                    default
      29            default                    default
      30            default                    default
      31            default                    default
# wanpipemon -i w1g1 -c Ta

***** w1g1: E1 Alarms (Framer) *****

ALOS:        OFF        | LOS:        OFF
RED:        OFF        | AIS:        OFF
OOF:        OFF        | RAI:        OFF

***** w1g1: E1 Alarms (LIU) *****

Short Circuit:        OFF
Open Circuit:        OFF
Loss of Signal:        OFF


***** w1g1: E1 Performance Monitoring Counters *****

Line Code Violation        : 324
Far End Block Errors        : 0
CRC4 Errors                : 0
FAS Errors                : 0


Rx Level        : > -2.5db


#

==========================================================

Cheers,

Jaap