[asterisk-users] TE121P Blue Alarm/Recovering

[Klaverstyn, David C]

I'd appreciate it if someone was able to assist.

 

Running the command:

dahdi_hardware:

pci:0000:08:08.0     wcte12xp+    d161:8000 Wildcard TE121

 

dahdi_scan:

[1]

active=yes

alarms=REC

description=Wildcard TE121 Card 0

name=WCT1/0

manufacturer=Digium

devicetype=Wildcard TE121 with VPMADT032

location=PCI Bus 08 Slot 09

basechan=1

totchans=31

irq=169

type=digital-E1

syncsrc=1

lbo=0 db (CSU)/0-133 feet (DSX-1)

coding_opts=HDB3

framing_opts=CCS,CRC4

coding=HDB3

framing=CCS

 

cat /etc/dahdi/system.conf:

bchan=1-15,17-31

dchan=16

echocanceller=mg2,1-15,17-31

 

loadzone = cn

defaultzone = cn

 

 

From: Klaverstyn, David C 
Sent: Monday, 28 September 2009 5:05 PM
To: 'asterisk-users at lists.digium.com'
Subject: TE121P Blue Alarm/Recovering

 

Hi All,

 

I have a TE121P card installed and since connected it to the PRI I keep
getting the Current Alarm as continually changing from Blue
Alarm/Recovering and Recovering.

 

The config I have is:

 

/etc/dahdi/system.conf

bchan=1-15,17-31

dchan=16

echocanceller=mg2,1-15,17-31

 

loadzone        = cn

defaultzone     = cn

 

/etc/asterisk/chan_dahdi.cfg

[channels]

Context=telco

language=cn

switchtype=euroisdn

signalling=pri_cpe

rxwink=300

usecallerid=yes

.

.

echocancel=yes

group=1

channel=>1-15,17-31

 

 

I installed the following components

Asterisk 1.4.26.2

DAHDI Linux 2.2.0.2

DAHDI Tools 2.2.0

Libpri 1.4.10.1

Addons 1.4.9

 

 

Any help would be greatly appreciated. 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090929/9b02abcb/attachment.htm