[asterisk-users] Problems with Digium TDM400 card

[Danny Nicholas]

It is probably as simple as doing a manual "modprobe wctdm".

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Angus Asterisk
Sent: Sunday, September 27, 2009 11:18 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Problems with Digium TDM400 card

 

I had a working Asterisk 1.4.24.1 installation on SUSE 9 Linux but SIP only.
I then downloaded and installed latest Zaptel and could not get Zaptel
working.  So I downloaded Asterisk again and re-installed.

 

But still problems:

 

Here is my ztcfg output:

asterisk:/etc/asterisk # ztcfg -vvvvv
Notice: Configuration file is /etc/zaptel.conf
line 4: Unable to read Zaptel version information.

 

Zaptel Version: Unknown
Echo Canceller: Unknown
Configuration
======================

 


Channel map:

 

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

 

4 channels to configure.

 

ZT_CHANCONFIG failed on channel 1: Inappropriate ioctl for device (25)

 

My zaptel.conf file is in /etc/ 

fxsks=1-4

loadzone=uk

defaultzone=uk

 

I know config above is correct because used to work in an older Asterisk 1.2
installation.

 

My zapata.conf file is in /etc/asterisk/

has this setting:

signalling=fxs_ks

 

What should I be looking at?  Works ok for SIP but I want to get the analog
card working.  It is a TDM04B.

 

Angus

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090928/6d4c22c8/attachment-0001.htm