[asterisk-users] Problems with Digium TDM400 card

[Angus Asterisk]

I had a working Asterisk 1.4.24.1 installation on SUSE 9 Linux but SIP only.  I then downloaded and installed latest Zaptel and could not get Zaptel working.  So I downloaded Asterisk again and re-installed.

But still problems:

Here is my ztcfg output:
asterisk:/etc/asterisk # ztcfg -vvvvv
Notice: Configuration file is /etc/zaptel.conf
line 4: Unable to read Zaptel version information.

Zaptel Version: Unknown
Echo Canceller: Unknown
Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

4 channels to configure.

ZT_CHANCONFIG failed on channel 1: Inappropriate ioctl for device (25)

My zaptel.conf file is in /etc/ 
fxsks=1-4
loadzone=uk
defaultzone=uk

I know config above is correct because used to work in an older Asterisk 1.2 installation.

My zapata.conf file is in /etc/asterisk/
has this setting:
signalling=fxs_ks

What should I be looking at?  Works ok for SIP but I want to get the analog card working.  It is a TDM04B.

Angus

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090927/93e5ba18/attachment.htm