[asterisk-users] Sangoma A200 and battery removal detection ??!!!

[Moises Silva]

On Sat, Sep 19, 2009 at 3:33 AM, M Shokuie <senahrm at gmail.com> wrote:

> Dear Folks,
>
> Anyone knows if Sangoma supports or going to provide support for battery
> removal detection on FXO lines?? As Tzafrir said earlier DAHDI supports it,
> which is a very nice feature but what about Sangoma?
>
>

Hello M. Shokuie,

In Asterisk installations, Sangoma boards use DAHDI drivers to hook up to
Asterisk ( because chan_dahdi works only with DAHDI devices). If you were
using FreeSWITCH you could use native wanpipe devices /dev/wanpipex_xx
instead of /dev/dahdi/x, which uses native Sangoma drivers.

In both modes the drivers notify on-hook, off-hook events depending on the
battery status.

 --
Moises Silva
Software Developer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090919/98afc390/attachment.htm