[asterisk-users] All the four lights blinking

[ABBAS SHAKEEL]

Thanks you very much Kevin.I will try it by connecting one end of  Ethernet
cable to one slot and other to second slot . Configuring one
as pri_net and the other as pri_cpe.

I will provide you feed on monday either i succed or not

On Fri, Sep 11, 2009 at 4:23 PM, Kevin P. Fleming <kpfleming at digium.com>wrote:

> ABBAS SHAKEEL wrote:
>
> > But I cant generate calls using the loop back connector and get the
> > following error
> >
> >
> > *CLI> [Sep  9 14:42:55] NOTICE[9981]: channel.c:3749
> > __ast_request_and_dial: Unable to request channel DAHDI/1/123
>
> You cannot use a loopback connector for a PRI interface; PRI signaling
> has a 'network' end and a 'customer' end, and using a loopback connector
> will make the system try to be both at the same time, which is not
> possible.
>
> You can use CAS (FXS/FXO/etc.) signaling on a loopback connector, or you
> can make a crossover cable and connect two ports of your card together,
> configuring one of them as pri_net and the other as pri_cpe.
>
> --
> Kevin P. Fleming
> Digium, Inc. | Director of Software Technologies
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> skype: kpfleming | jabber: kpfleming at digium.com
> Check us out at www.digium.com & www.asterisk.org
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2009 - October 13 - 15 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Best Regards
Shakeel Abbas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090911/8b5722dc/attachment.htm