[asterisk-users] How can I assigned an specific port of the T1 to an extension

[Juan Cardoza]

I am newbi in the asterisk side, I have AVAYA knowledge, I understand you,
but I have been searching on the internet but nothing have work.

Do you have a step by step manual or some screenshots about this.
It looks like this is easy but I have not find information on the web for
it.

I am configuring the asterisk server over the CLI, I don’t have a graphical
interface install.
I hope you can share me an extensions.conf file to see in a real example the
meaning of your words, of course if you can send it, if not, don’t worry I
appreciate your help, you have clear some ideas in my mind so I am continue
looking over the internet.

Thanks a lot
Jhon

-----Mensaje original-----
De: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] En nombre de Steve Edwards
Enviado el: Miércoles, 09 de Septiembre de 2009 05:19 p.m.
Para: Asterisk Users Mailing List - Non-Commercial Discussion
Asunto: Re: [asterisk-users] How can I assigned an specific port of the T1
to an extension

Un-top-posting (again)...

> Un-top-posting...
>
>> On Wed, 9 Sep 2009, Juan Cardoza wrote:
>>
>>> I need to assigned an specific port of a T1 (TE121 card) to an specific
>>> extension.
>
>> On Wed, 9 Sep 2009, Steve Edwards wrote:
>>
>> Does this mean
>>
>> 1) I want all calls made from extension x to be sent out over channel y?
>>
>> or
>>
>> 2) I want all calls coming in on channel y to be sent to extension x?
>>
>> For #1, try
>>
>> 	if	("x" = "${EXTEN}")
>> 		{
>> 		dial(zap/y/55555555555);
>> 		};
>>
>> For #2, try
>>
>> 	if	("Zap/y" = "${CHANNEL}")
>> 		{
>> 		dial(sip/x);
>> 		};
>>
>> (Both examples intended as suggestions, not literal, tested code.)
>
> On Wed, 9 Sep 2009, Juan Cardoza wrote:
>
>> Just to complete the information, do I need to load this to the
>> extensions.conf file, right?
>
> extensions.conf would be the place, but the examples are AEL which lives
> in extensions.ael. But again, this is an example, not literal code.
>
> What are you trying to accomplish?

On Wed, 9 Sep 2009, Juan Cardoza wrote:

> I have a TE121 card connected between AVAYA PG3r PBX and the asterisk, I
> have configured the digium card as a T1, in the AVAYA PBX I have stations
> that use the digital channels as virtual port, it means that each
extension
> need to have a ds0 port, then when the person dial the asterisk extension
> from virtual AVAYA extension, should be route to the asterisk extension.

If it is of interest...

If you can configure your Avaya as an E1, you could configure Asterisk
as an E1 and have 32 channels instead of 24. I've never done this, but
have heard it may be an option.

> In the other hand I need that one skill on the AVAYA PBX route calls from
> the PBX to the asterisk extensions, so this means the stations of asterisk
> should be read in the AVAYA PBX.

I'm not clear on exactly all this means, but it sounds like about 24 (or 32)

lines in extensions.conf to map each channel to an extension and then 24 
(or 32) lines to map each extension to each channel. You could do this in 
just a couple of lines with some fancy pattern matching.

If you have many more channels or anticipate frequent changes or if you 
want the users to be able to change the mapping via a web page you should 
consider storing the mapping in a database and then accessing the database 
within the dialplan using an AGI.

-- 
Thanks in advance,
-------------------------------------------------------------------------
Steve Edwards       sedwards at sedwards.com      Voice: +1-760-468-3867 PST
Newline                                              Fax: +1-760-731-3000

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

AstriCon 2009 - October 13 - 15 Phoenix, Arizona
Register Now: http://www.astricon.net

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Teleperformance values: Integrity - Respect - Professionalism - Innovation - Commitment

The information contained in this communication is privileged and confidential.  The content is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.  If you have received this communication in error, please notify me immediately by telephone or e-mail, and delete this message from your systems.
Please consider the environmental impact of needlessly printing this e-mail.