[asterisk-users] All the four lights blinking
ABBAS SHAKEEL
shakeel.abbas.qau at gmail.com
Wed Sep 9 02:42:50 CDT 2009
By Connecting a loopback connector to a port the line turns green.
http://i580.photobucket.com/albums/ss246/shakeelabbas/loop_back.jpg
using dahdi show status i get this
Description Alarms IRQ bpviol CRC4 Fra
Codi Options LBO
T4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 2 RED 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 3 RED 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 4 RED 0 0 0 CCS
HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
*CLI> [Sep 9 14:41:34] WARNING[9973]: chan_dahdi.c:11879 pri_dchannel: PRI
Error on span 0: We think we're the CPE, but they think they're the CPE too.
But I cant generate calls using the loop back connector and get the
following error
*CLI> [Sep 9 14:42:55] NOTICE[9981]: channel.c:3749 __ast_request_and_dial:
Unable to request channel DAHDI/1/123
THANKS
On Wed, Sep 9, 2009 at 12:47 PM, ABBAS SHAKEEL
<shakeel.abbas.qau at gmail.com>wrote:
> HelloI have the following system
>
> Asterisk 1.6.1dahdi 2.2.0.2
>
> TE420P card
>
> Centos
>
> I have noticed that all the four lights are blinking(ie coming red and
> then off so on)...
>
> Previously I also noted that when dahdi drivers are not installed lights
> blink but one by one in sequence(like in marriage cermonies :P) and after
> dahdi installation lights get off ... but this time all at same time
> (blinking)
>
>
> Is this a problem ??
>
> --
> Best Regards
> Shakeel Abbas
>
>
--
Best Regards
Shakeel Abbas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090909/e02c04eb/attachment.htm
More information about the asterisk-users
mailing list