[asterisk-users] Asterisk CLI commands not running !!!!!

[Mindaugas Kezys]

Asterisk sometimes goes to sleep. (And never wakes-up).

 

Restart it and all will be fine again.

 

We have a watchdog which sends SIP OPTIONS packet to Asterisk and if it does
not respond – restarts it.

 

Regards,

Mindaugas Kezys

http://www.kolmisoft.com

VoIP Billing and Routing Solutions

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of abdelkader
Sent: 2009 m. rugsėjo 8 d. 10:40
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Asterisk CLI commands not running !!!!!

 

Hello,

I am using Asterisk 1.4.22 in a debian 4.0 with a kernel version
2.6.18-6-amd64 (SMP). The processor type is Intel(R) Xeon(R) CPU E5420 @
2.50GHz.

Sometimes, I get a strange behavior from asterisk: The CLI commands does not
work and Asterisk cannot receive calls. The output of every CLI command is
that command is not known (no such command).

Please help me resolve this problem: what can be the cause of it? is it
Asterisk or my system? and what have I to do to eliminate this problem?

Thks in advance.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090908/21da3855/attachment-0001.htm