[asterisk-users] Digium hardware support ?

[Martin]

PCI  Express x1 card will work and will fit in the x8 slot
PCI-X slots are usually 3.3V

Martin

On Mon, Sep 7, 2009 at 10:35 AM, mancyborg at gmail.com<mancyborg at gmail.com> wrote:
> On Mon, 7 Sep 2009 08:48:25 -0500
> "Juan Cardoza" <jcardoza at tpmex.com> wrote:
>
>> Hello
>>
>> What is your Asterisk problem?, may be I can help you...
>> I had configure a T1 Card TE121 connected with and AVAYA PBX
>> Best regards
>
> Hi Juan,
>
> thanks for your help.
>
> I'm going to choose a 4 ports PRI digium card for this server:
> http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/15351-15351-241434-241646-241477-1121586-3638086-3638087.html
> which specs are here:
> http://h18004.www1.hp.com/products/quickspecs/12475_na/12475_na.html
> and I read that the slots are:
> One 64-bit/133-MHz PCI-X; two 64-bit/100-MHz PCI-X; three x8 PCI Express (x4 speed)
>
> so, since the digium PCI-E card is x1, it does not fit in the x8
>
> but, the digium PCI cards,
> this one:
> http://www.voipango.com/en/ISDNInterfaces/Digium/BRI-PRI-E1-T1-J1/Digium-TE407PF-T1/E1-PRI-PCI-5-0V-HW-EC.html
> or this one:
> http://www.voipango.com/en/ISDNInterfaces/Digium/BRI-PRI-E1-T1-J1/Digium-TE412PF-T1/E1-PRI-PCI-3-3V.html
> should fit in the PCI-X slot, since PCI-X has backward compatibility toward older PCI.
>
> But I still don't understand if the PCI-X slots of the ML350 is 3.3V or 5.0V
> OR if it has autosense (supports both).
>
> Thanks and have a nice day.
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2009 - October 13 - 15 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>