[asterisk-users] Dahdi configuraion / error

Joao Gomes Pereira gomespereira at startel.pt
Thu Sep 3 12:05:41 CDT 2009 

here are my logs when I start the dahdi driver:
  /etc/rc.d/init.d/dahdi start


Sep  3 18:02:39 catumbela kernel: Found TE4XXP at base address fdcff000, 
remapped to f88a8000
Sep  3 18:02:39 catumbela kernel: TE4XXP version c01a0164, burst OFF
Sep  3 18:02:39 catumbela kernel: FALC version: 00000005, Board ID: 00
Sep  3 18:02:39 catumbela kernel: Reg 0: 0x2afea400
Sep  3 18:02:39 catumbela kernel: Reg 1: 0x2afea000
Sep  3 18:02:39 catumbela kernel: Reg 2: 0xffffffff
Sep  3 18:02:39 catumbela kernel: Reg 3: 0x00000000
Sep  3 18:02:39 catumbela kernel: Reg 4: 0x00000000
Sep  3 18:02:39 catumbela kernel: Reg 5: 0x00000000
Sep  3 18:02:39 catumbela kernel: Reg 6: 0xc01a0164
Sep  3 18:02:39 catumbela kernel: Reg 7: 0x00001f00
Sep  3 18:02:39 catumbela kernel: Reg 8: 0x010200ff
Sep  3 18:02:39 catumbela kernel: Reg 9: 0x00fd0000
Sep  3 18:02:39 catumbela kernel: Reg 10: 0x0000004a
Sep  3 18:02:39 catumbela kernel: Found a Wildcard: Wildcard TE405P (2nd 
Gen)
Sep  3 18:02:39 catumbela kernel: TE4XXP: Launching card: 0
Sep  3 18:02:39 catumbela kernel: TE4XXP: Setting up global serial 
parameters
Sep  3 18:02:39 catumbela dahdi:   wct4xxp:  succeeded
Sep  3 18:02:39 catumbela kernel: About to enter spanconfig!
Sep  3 18:02:39 catumbela kernel: Done with spanconfig!
Sep  3 18:02:39 catumbela kernel: About to enter startup!
Sep  3 18:02:39 catumbela kernel: TE4XXP: Span 1 configured for CAS/HDB3
Sep  3 18:02:39 catumbela kernel: timing source auto card 0!
Sep  3 18:02:39 catumbela kernel: wct4xxp: Setting yellow alarm on span 1
Sep  3 18:02:39 catumbela kernel: timing source auto card 0!
Sep  3 18:02:39 catumbela kernel: SPAN 1: Primary Sync Source
Sep  3 18:02:39 catumbela kernel: VPM400: Not Present
Sep  3 18:02:39 catumbela kernel: VPM450: Not Present
Sep  3 18:02:39 catumbela kernel: Completed startup!
Sep  3 18:02:39 catumbela dahdi: Running dahdi_cfg:  succeeded




Joao Gomes Pereira escreveu:
> it looks like this:
> 
>   tail /etc/dahdi/modules
> # Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) 
> on Wed Jun 24 12:41:26 2009
> # If you edit this file and execute /usr/sbin/dahdi_genconf again,
> # your manual changes will be LOST.
> wct4xxp
> 
> 
> Danny Nicholas escreveu:
>> "No such device" is sometimes an indication that /etc/init.d/dahdi start did
>> not load the driver.  
>> What does /etc/dahdi/modules look like?
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joao Gomes
>> Pereira
>> Sent: Thursday, September 03, 2009 11:35 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Dahdi configuraion / error
>>
>>
>>
>> Tzafrir Cohen escreveu:
>>> On Tue, Sep 01, 2009 at 08:53:04AM -0500, Danny Nicholas wrote:
>>>> This may be dumb and/or obvious, but did you do these steps?
>>>> 1. dahdi_genconf dahdi modules user to make sure all of the configuration
>>>> files are up to standard
>> this is an R23 connection, so I dont think genconfig will help. Also, I 
>> already had this working .... but not its not working... I dont know why
>>
>>> (Which will default to generate a ccs configuration for it, rather than
>>> cas)
>>>
>>> Current configuration appears to be OK at first glance.
>>>
>>>> 2. dahdi_cfg -vv to see if any obvious messages came up (causing the red
>>>> condition(s) )
>>>>
>>>> The information you have provided is useful, but it boils down to this
>> (IMO)
>>>> - RED is dead!
>>> Is there actually a cable plugged? Connecting it to a live system?
>> Yes, it has a cable connected (in port 1) to a Telco, so Im configuerd 
>> as slave.
>>
>> Here is the dahdi_cfg -vv ( sorry for the long post )
>>
>> [root at catumbela modules]# dahdi_cfg -vv
>> DAHDI Tools Version - 2.2.0
>>
>> DAHDI Version: 2.2.0.2
>> Echo Canceller(s):
>> Configuration
>> ======================
>>
>> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>> SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>> SPAN 3: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>> SPAN 4: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>
>> Channel map:
>>
>> Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
>> Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
>> Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
>> Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
>> Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
>> Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
>> Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
>> Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
>> Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
>> Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
>> Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
>> Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
>> Channel 13: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 13)
>> Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
>> Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
>> Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
>> Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17)
>> Channel 18: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 18)
>> Channel 19: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 19)
>> Channel 20: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 20)
>> Channel 21: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 21)
>> Channel 22: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 22)
>> Channel 23: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 23)
>> Channel 24: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 24)
>> Channel 25: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 25)
>> Channel 26: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 26)
>> Channel 27: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 27)
>> Channel 28: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 28)
>> Channel 29: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 29)
>> Channel 30: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 30)
>> Channel 31: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 31)
>> Channel 32: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 32)
>> Channel 33: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 33)
>> Channel 34: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 34)
>> Channel 35: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 35)
>> Channel 36: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 36)
>> Channel 37: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 37)
>> Channel 38: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 38)
>> Channel 39: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 39)
>> Channel 40: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 40)
>> Channel 41: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 41)
>> Channel 42: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 42)
>> Channel 43: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 43)
>> Channel 44: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 44)
>> Channel 45: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 45)
>> Channel 46: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 46)
>> Channel 47: D-channel (Default) (Echo Canceler: none) (Slaves: 47)
>> Channel 48: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 48)
>> Channel 49: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 49)
>> Channel 50: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 50)
>> Channel 51: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 51)
>> Channel 52: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 52)
>> Channel 53: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 53)
>> Channel 54: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 54)
>> Channel 55: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 55)
>> Channel 56: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 56)
>> Channel 57: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 57)
>> Channel 58: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 58)
>> Channel 59: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 59)
>> Channel 60: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 60)
>> Channel 61: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 61)
>> Channel 62: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 62)
>> Channel 63: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 63)
>> Channel 64: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 64)
>> Channel 65: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 65)
>> Channel 66: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 66)
>> Channel 67: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 67)
>> Channel 68: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 68)
>> Channel 69: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 69)
>> Channel 70: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 70)
>> Channel 71: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 71)
>> Channel 72: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 72)
>> Channel 73: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 73)
>> Channel 74: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 74)
>> Channel 75: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 75)
>> Channel 76: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 76)
>> Channel 77: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 77)
>> Channel 78: D-channel (Default) (Echo Canceler: none) (Slaves: 78)
>> Channel 79: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 79)
>> Channel 80: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 80)
>> Channel 81: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 81)
>> Channel 82: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 82)
>> Channel 83: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 83)
>> Channel 84: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 84)
>> Channel 85: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 85)
>> Channel 86: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 86)
>> Channel 87: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 87)
>> Channel 88: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 88)
>> Channel 89: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 89)
>> Channel 90: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 90)
>> Channel 91: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 91)
>> Channel 92: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 92)
>> Channel 93: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 93)
>> Channel 94: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 94)
>> Channel 95: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 95)
>> Channel 96: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 96)
>> Channel 97: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 97)
>> Channel 98: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 98)
>> Channel 99: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 99)
>> Channel 100: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 100)
>> Channel 101: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 101)
>> Channel 102: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 102)
>> Channel 103: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 103)
>> Channel 104: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 104)
>> Channel 105: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 105)
>> Channel 106: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 106)
>> Channel 107: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 107)
>> Channel 108: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 108)
>> Channel 109: D-channel (Default) (Echo Canceler: none) (Slaves: 109)
>> Channel 110: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 110)
>> Channel 111: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 111)
>> Channel 112: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 112)
>> Channel 113: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 113)
>> Channel 114: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 114)
>> Channel 115: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 115)
>> Channel 116: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 116)
>> Channel 117: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 117)
>> Channel 118: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 118)
>> Channel 119: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 119)
>> Channel 120: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 120)
>> Channel 121: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 121)
>> Channel 122: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 122)
>> Channel 123: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 123)
>> Channel 124: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 124)
>>
>> 124 channels to configure.
>>
>> DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
>> [root at catumbela modules]#
>>
>>
>>
>> Any idea of what could be nmissing?
>> Thanks a lot
>> Joao Pereira
>>
>>
>>
>>
>>
> 

-- 
StarTel - A Rede Livre
Joao Gomes Pereira
www.startel.pt
+351 304500650
sip: gomespereira at startel.pt

More information about the asterisk-users mailing list