[asterisk-users] How to dial multiple extensions at once like in aring group and put them in conference?

[Danny Nicholas]

Use an AGI that does a Mass originate/call to ring everyone at once.  Have
the AGI do an originate loop using a context to dump into the conference and
call it from the dialplan like this:

- exten => s,1,AGI(massconf.agi|ext1|ext2|ext3|ext4|ext5.)

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zeeshan
Zakaria
Sent: Tuesday, October 27, 2009 9:19 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] How to dial multiple extensions at once like in
aring group and put them in conference?

 

Hi,

I have to set this up for a client, where he could dial multiple extensions
at once, and then put all who picks up into a conference.

I am using a script which does it using originate command. But the originate
commands run one after another, and so it takes a few seconds to call the
extensions, one after another. This is not acceptable by the client.

If I use Dial(SIP/201&SIP/202..., it is like a ringgroup, where if one
extension picks up, others stop ringing.

Is there a way to dial all the extensions at once and then put them in the
conference?

-- 
Zeeshan A Zakaria

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091027/fd5742d8/attachment.htm