[asterisk-users] Cisco 1751 setup with asterisk

[Jonathan Thurman]

On Mon, Oct 19, 2009 at 3:42 PM, Joseph <syscon780 at gmail.com> wrote:
> How hard is to setup Cisco 1751 w/2x FXO with asterisk?
> I was googling but couldn't find much information; how to access unit interface for programming?

I haven't personally used a 1751, but I have used the 1760 series and
2800 series.  It depends on what you are trying to do, but in general
they are not that difficult to configure if you just want to send
calls to it and have inbound calls route in.  If you want to register
each port, you are out of luck (or tell me how!)  You also can't
qualify these devices.

> It might be a good replacement for Linksys.

Not likely.  Cisco works great with CallManager, but seems to be
somewhat broken with anything else... wonder why?  If you want
something that is dependable and easy to configure I have had great
success with the AudioCodes MP-114 devices.

-Jonathan