[asterisk-users] Asterisk 1.6 with TDM2400 and 2 FXS modules
Eckhard Jokisch
e.jokisch at orange-moon.de
Mon Oct 12 10:59:16 CDT 2009
Hi,
I set up my asterisk so it does dial out on DAHDI/1 which is on an FXS modul.
But the phone that is attached to the line does nothing at all.
asterisk-CLI shows a lot of
-- DAHDI/1-1 is ringing
-- DAHDI/1-1 is ringing
-- DAHDI/1-1 is ringing
Even when I lift up the handset during (and no asterisk-activity) I do not get
the usual line tone.
CLI>dahdi show channel 1 gives:
File Descriptor: 17
Span: 1
Extension:
Dialing: no
Context: DLPN_DialPlan1
Caller ID: 4000
Calling TON: 0
Caller ID name: FXS 1
Mailbox: 4000
Destroy: 0
InAlarm: 0
Signalling Type: FXO Kewlstart
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Busy Detection: no
TDD: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
DND: no
Echo Cancellation:
128 taps
currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Onhook
What am I missing?
Cheers
Eckhard
More information about the asterisk-users
mailing list