[asterisk-users] tdm outgoing

[B.Masoud @ SH]

Thanks,
I made the zone, and now call disconnect works ok!

i have one last problem, I have defined the card g0 to have 24 channels, but
every time I try to call, if all ports are off the call always go to the
first port, how can I balance the calls over all ports???

Any suggestions appreciated.

Thanks all for the help.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ioan Indreias
Sent: Monday, October 05, 2009 5:43 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] tdm outgoing

>
> I cant find Zapata.cfg

You have a DAHDI installation thus you have to find chan_dahdi.conf.
it should be located under /etc/asterisk

Regarding the configuration for tones you have to check indications.conf
file

Best regards,
Nini

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

AstriCon 2009 - October 13 - 15 Phoenix, Arizona
Register Now: http://www.astricon.net

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users