[asterisk-users] ASTERISK and SNMP
mickael ropars
mropars at gmail.com
Fri Nov 27 07:08:22 CST 2009
thanks all for your help, I really appreciate.
now it's working
My problem was due to
Nov 27 12:56:28 trixbox1 snmpd[5743]: /etc/snmp/snmpd.conf: line 61: Error:
example config COMMUNITY not properly configured
Nov 27 12:56:28 trixbox1 snmpd[5743]: /etc/snmp/snmpd.conf: line 62: Error:
example config NETWORK not properly configured
with the link michal gave to me I succeed in getting asterisk working
regards
Mickael
2009/11/27 Lee Archer <Lee.Archer at thebigword.com>
> I use CentOS, and it works fairly well. But I had to piece together
> info from several places. I've tried it several different wants and this
> way worked, as long as asterisk is run as root.
>
>
>
> Copy asterisk-mib.txt and digium-mib.txt from <asterisk_source>/doc to
> /usr/share/snmp/mibs/
>
>
>
> mkdir /var/agentx
>
> touch /var/agentx/master
>
>
>
> My /etc/asterisk/res_snmp.conf
>
>
>
> ;
>
> ; Configuration file for res_snmp
>
> ;
>
>
>
> [general]
>
> ; We run as a subagent per default -- to run as a full agent
>
> ; we must run as root (to be able to bind to port 161)
>
> ;subagent = yes
>
> ; SNMP must be explicitly enabled to be active
>
> enabled = yes
>
>
>
> My snmp.conf
>
>
>
> rwcommunity private 127.0.0.1
>
> rocommunity public
>
> disk /
>
> master agentx
>
> agentXperms 0660 0550 root root
>
>
>
> restart snmp and the /var/agentx/master should look like srw-rw---- 1 root
> root 0 Nov 25 11:31 /var/agentx/master
>
>
>
> restart asterisk manually and you see a net-snmp connect.
>
>
>
> export MIBS=+ASTERISK-MIB
>
>
>
> You should be able to to do a snmpwalk -v 2c -c public localhost asterisk
>
>
>
> Regards
>
>
>
> Lee
>
>
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *mickael ropars
> *Sent:* 27 November 2009 11:58
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] ASTERISK and SNMP
>
>
>
> Michal
>
> please wait I found some issues in my con file
>
> 2009/11/27 mickael ropars <mropars at gmail.com>
>
> I am running on Trixbox so my OS is Cent0S 5.4 and the Asterisk version is
> 1.4.22-4
>
> on asterisk side Snmp module is running:
>
> > module load res_snmp.so
> == Parsing '/etc/asterisk/res_snmp.conf': Found
> Loading [Sub]Agent Module
> Loaded res_snmp.so => (SNMP [Sub]Agent for Asterisk)
>
> see below my snmpd.conf file (I remove commented line for an easy reading)
>
> regards
>
> Mickael
>
>
>
>
>
> ###############################################################################
> # Access Control
>
> ###############################################################################
>
> ####
> # First, map the community name (COMMUNITY) into a security name
> # (local and mynetwork, depending on where the request is coming
> # from):
>
> # sec.name source community
> com2sec local localhost COMMUNITY
> com2sec mynetwork NETWORK/24 COMMUNITY
>
>
> rwcommunity local
> rocommunity local
>
> ####
> # Second, map the security names into group names:
>
> # sec.model sec.name
> group MyRWGroup v1 local
> group MyRWGroup v2c local
> group MyRWGroup usm local
> group MyROGroup v1 mynetwork
> group MyROGroup v2c mynetwork
> group MyROGroup usm mynetwork
>
> ####
> # Third, create a view for us to let the groups have rights to:
>
> # incl/excl subtree mask
> view all included .1 80
>
> ####
> # Finally, grant the 2 groups access to the 1 view with different
> # write permissions:
>
> # context sec.model sec.level match read write notif
> access MyROGroup "" any noauth exact all none none
> access MyRWGroup "" any noauth exact all all none
>
>
>
> ###############################################################################
> # System contact information
> #
>
> syslocation Right here, right now.
> syscontact Me <me at somewhere.org>
>
>
>
>
> ###############################################################################
> # Process checks.
> #
> # Make sure mountd is running
> proc mountd
>
> # Make sure there are no more than 4 ntalkds running, but 0 is ok too.
> proc ntalkd 4
>
> # Make sure at least one sendmail, but less than or equal to 10 are
> running.
> proc sendmail 10 1
>
>
>
> ###############################################################################
> # Executables/scripts
> #
>
> # a simple hello world
> exec echotest /bin/echo hello world
>
>
> ###############################################################################
> # disk checks
> #
>
> disk / 10000
>
>
>
> ###############################################################################
> # load average checks
> #
>
> # Check for loads:
> load 12 14 14
>
>
>
> ###############################################################################
> # Extensible sections.
> #
>
>
>
>
> ###############################################################################
> # Pass through control.
> #
>
>
> ###############################################################################
> # Subagent control
>
>
> #
>
> master agentx
> agentXperms 0660 0550 nobody asterisk
> SNMPD_FLAGS="${SNMPD_FLAGS} -x /var/agentx/master"
> mibs +ASTERISK-MIB
>
>
> ###############################################################################
> # Further Information
>
>
>
>
>
> 2009/11/27 michal kalinowski <michal.kalinowski at interia.pl>
>
> What operating system do You have ? What asterisk version You compile ?
> After install net-snmp do You recompile asterisk with res_snmp module ?
>
> I'm used instruction from here
> http://voxilla.com/2009/02/03/configuring-asterisk-snmp-support-1131
> and everything work correctly.
>
> BR,
> Michał
> W dniu 27 listopada 2009 11:18 użytkownik mickael ropars
> <mropars at gmail.com> napisał:
>
> > Hi Michal,
> >
> > thanks a lot for you quick answer I appreciate.
> >
> > I run your commands and I have the following answer
> >
> > [localhost snmp]# snmpwalk -c local -v 1 localhost asterisk
> > no answer
> >
> > [localhost snmp]# snmpwalk -c local -v 2c localhost asterisk
> > ASTERISK-MIB::asterisk = No Such Object available on this agent at this
> OID
> >
> >
> > since I don't know well snmp what's going wrong ?
> >
> > regards
> >
> > Mickael
> >
> >
> >
> > 2009/11/27 michal kalinowski <michal.kalinowski at interia.pl>
> >>
> >> Hello Mickael
> >>
> >> Here You have the snmpd.conf file
> >>
> >> cat /etc/snmp/snmpd.conf
> >> rocommunity your_community
> >> master agentx
> >> agentXperms 0660 0550 nobody asterisk
> >> SNMPD_FLAGS="${SNMPD_FLAGS} -x /var/agentx/master"
> >> mibs +ASTERISK-MIB
> >>
> >> and also you need create file /etc/snmp/snmp.conf with following entry
> >> "mibs +ASTERISK-MIB"
> >>
> >> cat /etc/snmp/snmp.conf
> >> mibs +ASTERISK-MIB
> >>
> >> Next use command "snmpwalk -c your_community -v 1 localhost asterisk"
> >> to check is everything correct.
> >>
> >>
> >>
> >> Michał
> >>
> >> 2009/11/27 mickael ropars <mropars at gmail.com>:
> >> > Hi all,
> >> >
> >> > I am currently not able to configure SNMP for asterisk, but I am not
> >> > able to
> >> > acess to the asterisk MIB (the asterisk MIB is in
> /usr/share/snmp/mibs/)
> >> >
> >> >
> >> > Does somebody has an example of smnpd.conf file wich is working ?
> >> >
> >> > regards
> >> >
> >> > Mickael
> >> >
> >> > _______________________________________________
> >> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >> >
> >> > asterisk-users mailing list
> >> > To UNSUBSCRIBE or update options visit:
> >> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >> >
> >>
> >> _______________________________________________
> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >>
> >> asterisk-users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091127/fe74a15c/attachment.htm
More information about the asterisk-users
mailing list