[asterisk-users] transferring SIP call: no voice

[sean darcy]

sean darcy wrote:
> I'm trying to connect a sip call from sipgate to Asterisk A to Asterisk 
> B. Both are behind NAT, but port forwarded. I get the connection, but no 
> voice - either in or out.
> 
> I can call on SIP from A to B (and from B to A). Do it all the time.
> 
> Asterisk A receives SIP calls from Junction and Teliax.
> 
> CLI on A looks right:
>    == Using SIP RTP TOS bits 184
>    == Using SIP RTP CoS mark 5
>    == Using SIP VRTP CoS mark 6
>    == Using UDPTL TOS bits 184
>    == Using UDPTL CoS mark 5
>      -- Executing [3008384e0 at sipgate-test:1] 
> Answer("SIP/sipgate-00000016", "") in new stack
>      -- Executing [3008384e0 at sipgate-test:2] 
> Goto("SIP/sipgate-00000016", "home,447,1") in new stack
>      -- Goto (home,447,1)
>      -- Executing [447 at home:1] NoOp("SIP/sipgate-00000016", "xxxxxxxxx") 
> in new stack
>      -- Executing [447 at home:2] NoOp("SIP/sipgate-00000016", 
> ""yyyyyyyyyyy" <xxxxxxxxx>") in new stack
>      -- Executing [447 at home:3] Dial("SIP/sipgate-00000016", 
> "SIP/nhi-riverside-sip") in new stack
>    == Using SIP RTP TOS bits 184
>    == Using SIP RTP CoS mark 5
>    == Using SIP VRTP CoS mark 6
>    == Using UDPTL TOS bits 184
>    == Using UDPTL CoS mark 5
>      -- Called nhi-riverside-sip
>      -- SIP/nhi-riverside-sip-00000017 answered SIP/sipgate-00000016
>      -- Packet2Packet bridging SIP/sipgate-00000016 and 
> SIP/nhi-riverside-sip-00000017
> 
> And on B:
> 
>      -- Executing [s at incoming:1] 
> Answer("SIP/nhi-riverside-sip-00000009", "") in new stack
>      -- Executing [s at incoming:2] NoOp("SIP/nhi-riverside-sip-00000009", 
> "" callerid: ""yyyyyyyyyyyyy" <xxxxxxxxxxxxx>") in new stack
>      -- Executing [s at incoming:3] Dial("SIP/nhi-riverside-sip-00000009", 
> "DAHDI/g0,60") in new stack
>      -- Called g0
>      -- DAHDI/1-1 is ringing
> 
> Asterisk A sip.conf:
> 
> [sipgate]
> type=friend
> secret=  ;;SIP_PASSWORD
> insecure=port,invite
> defaultuser=  ;; SIP-ID
> fromuser=      ;;SIP-ID
> context=sipgate-test
> fromdomain=sipgate.com
> host=sipgate.com
> outboundproxy=proxy.live.sipgate.com
> qualify=yes
> disallow=all
> allow=ulaw
> dtmfmode=rfc2833
> nat=yes
> canreinvite=no
> 
> Asterisk A extensions.conf:
> 
> [sipgate-test]
> exten => _X.,1,Answer()
> exten => _X.,n,GoTo(home,447,1)
> 
> [home]
> exten =>447,1,NoOp(${CALLERID(num)})
> exten =>447,n,NoOp(${CALLERID(all)})
> exten=>447,n,Dial(SIP/nhi-riverside-sip)
> 
> And iptables on the router for Asterisk A:
> 
> $IPT -t nat -A PREROUTING -i $EXTIF  -p udp --dport 5060 -j DNAT --to 
> 10.10.10.180:5060
> $IPT -A FORWARD -p udp --dport 5060 -m state --state NEW -d 10.10.10.180 
> -j ACCEPT
> 
> # for sip, also port forward rtp ports
> $IPT -t nat -A PREROUTING -i $EXTIF -p udp --dport 10000:20000 -j DNAT 
> --to 10.10.11.180 # sip rtp
> $IPT -A FORWARD -i $EXTIF -p udp --dport 10000:20000 -j ACCEPT
> 
> What am I missing?
> 
> sean
> 

FWIW, asterisk A is 1.6.0.18, B is 1.6.1.10.

sean