[asterisk-users] destroy zombie session

[Danny Nicholas]

What does the "zombie" call look like in "core show channels"?

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Aggio Alberto
Sent: Friday, November 13, 2009 10:33 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] destroy zombie session

 

Hi all,

Some time ago I posted an issue regarding the hangup of active calls from
the CLI and someone told me that "soft hangup" should work. Well, in fact it
does work, but only if the channel is known, i.e. it doesn't work for zombie
channels. For example, I have this scenario (CLI output of command "iax2
show channels")

 

IP-AM-PBX*CLI> iax2 show channels

Channel               Peer             Username    ID (Lo/Rem)  Seq (Tx/Rx)
Lag      Jitter  JitBuf  Format

(None)                10.229.47.113    REMOTE_SER  06818/14174  00002/00002
00000ms  -0001ms  0000ms  unknow

1 active IAX channel

IP-AM-PBX*CLI>

 

Here I can't issue "soft hangup" command because I haven't a channel to
specify ("None" is not a choice :-) ).

Now the question is: is there a way to drop this (zombie) channel off and
release frozen resources? Restarting asterisk is not an option (or maybe the
last chance if I have no other way to achieve this result :-))

 

Thanks in advance for your replies.

Cheers,

 

Alberto Aggio.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091113/c68f1f21/attachment.htm