[asterisk-users] Questions about Dahdi's /etc/dahdi/genconf_parameters

[Olivier]

Hello,

1. How can specify in /etc/dahdi/genconf_parameters file that a port from a
B410P board is to be "disabled".
Playing with comments (see bellow) doesn't help : file
/etc/asterisk/dahdi-channels.conf is filled with 4 ports data.

pri_termtype
        SPAN/1          TE
        SPAN/2          TE
        SPAN/3          TE
#       SPAN/4          TE

2. How can specify groups in /etc/dahdi/genconf_parameters ?
I would like to group SPAN/1 and SPAN/2 into group 1 and SPAN/3 into group
2.
I was unsuccessful with :

group_lines             1
pri_termtype
        SPAN/1          TE
        SPAN/2          TE
group_lines             2
pri_termtype
        SPAN/3          TE

3. After a dahdi_genconf commande, generated
/etc/asterisk/dahdi-channels.conf is like this :
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
group=5,11
context=remote
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63

I can see 2 "group=" and "context=" lines. What is the difference between
them ?
Shall I care to have them both ?

Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091110/847bbeae/attachment.htm