[asterisk-users] Setting outgoing callerid on when using a PRI

[Klaus Darilion]

use pri debugging (pri debug span 1) to verify if the data sent on the 
PRI line is correct! (e.g. type on number, ...)

verify with an incoming call and set the same format on outgoing calls.

regards
klaus

Jon Moore schrieb:
> Hi list.  I've googled around for this, and so far have come up short.
> 
> I'm attempting to set the outbound callerid when making a call using
> our PRI.  I've talked with ATT (the providor) and they have said the
> screening table has been disabled, so anything my phone system sends
> for callerid should be passing along.  However, when I make a call,
> the primary number assigned on our PRI is showing up, not the value
> I've set.
> 
> Here is how I'm making the call...
> 
> exten => _91NXXNXXXXXX,1,Set(CALLERID(all)="Corner Homecare" <12703653903>)
> exten => _91NXXNXXXXXX,2,Dial(DAHDI/G2/${EXTEN:1}})
> 
> I'll be glad to offer up any debugging information that you might
> need, if it will help. I'm using Asterisk 1.6.0.14 and DAHDI 2.2.0.
> 
> TIA
> 
> -jonathan
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users