[asterisk-users] Queue device state problem

[Alexandre Rodrigues]

Hi Jared,

The members that are from local channel now work. thanks :)

I did has you said and added the following modules in the module.conf:

preload => chan_local.so
preload => pbx_config.so
preload => pbx_realtime.so
preload => chan_sip.so
preload => app_queue.so

The sip members that are in realtime do not work. This is a minor
problem for me, now that the chan_local members are working fine, but
as a curiosity, do you understand way this is happening?


Alex


2009/11/4 Jared Smith <jsmith at digium.com>:
> On Wed, 2009-11-04 at 15:16 +0000, Alexandre Rodrigues wrote:
>> I  changed my call-limit to one, and the same problem continues when I
>> restart asterisk. Have you any moore ideias to solve this problem?
>
> There's a note in the sample queues.conf configuration file (at least in
> the 1.6.2 branch) which states the following:
>
> ; It is important to ensure that channel drivers used for members are loaded
> ; before app_queue.so itself or they may be marked invalid until reload. This
> ; can be accomplished by explicitly listing them in modules.conf before
> ; app_queue.so.  Additionally, if you use Local channels as queue members, you
> ; must also preload pbx_config.so and chan_local.so (or pbx_ael.so, pbx_lua.so,
> ; or pbx_realtime.so, depending on how your dialplan is configured).
>
> I think if you load chan_sip (and optionally the other modules listed)
> in modules.conf, that should take care of your problem.
>
>
>
> --
> Jared Smith
> Training Manager
> Digium, Inc.
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>