[asterisk-users] faxes received on mISDN

Thu Nov 5 07:08:47 CST 2009

My bad.
I apparently forgot to add "faxdetect" in misdn.conf.
It now works fine.

What is the alternative to mISDN on BRI lines?

Thanks,

Vieri

--- On Thu, 11/5/09, Steve Underwood <steveu at coppice.org> wrote:

> Hi Vieri,
> 
> Get rid of mISDN. Its a disaster.
> 
> Steve
> 
> On 11/05/2009 07:27 PM, Vieri wrote:
> > Hi,
> >
> > My initial setup for receiving faxes worked as
> follows:
> >
> > fax call arrives on ISDN BRI connected to a BOSCH PBX,
> signal sent to ALCATEL PBX via PRI QSIG then finally sent to
> ASTERISK via PRI EUROISDN. The Asterisk server then
> forwarded the call to a iaxmodem and HylaFax received the
> data. All worked fine.
> >
> > Now I got rid of both BOSCH and ALCATEL in the "fax
> path" and it's as follows:
> >
> > fax call arrives on ISDN BRI connected to Asterisk,
> call forwarded to a iaxmodem.
> >
> > Despite the simpler setup, the faxes don't come in.
> > > From the logs I can see that Asterisk receives
> fax calls and dials the iaxmodem (on localhost). However, no
> data is transmitted according to Hylafax.
> >
> > I'm wondering if hdlc can be the culprit (not sure
> what it is and what it does). Should I set hdlc to yes in
> misdn.conf (I'm asking before testing because this is a
> production system)?
> >
> > misdn.conf:
> >
> > [general]
> > misdn_init=/etc/misdn-init.conf
> > debug=0
> > ntdebugflags=0
> > ntdebugfile=/var/log/misdn-nt.log
> > ntkeepcalls=no
> > bridging=no
> > stop_tone_after_first_digit=yes
> > append_digits2exten=yes
> > dynamic_crypt=no
> > crypt_prefix=**
> > crypt_keys=test,muh
> > [default]
> > context=misdn
> > language=us
> > musicclass=default
> > senddtmf=yes
> > far_alerting=no
> > allowed_bearers=all
> > nationalprefix=0
> > internationalprefix=00
> > rxgain=0
> > txgain=0
> > te_choose_channel=no
> > pmp_l1_check=no
> > reject_cause=16
> > need_more_infos=no
> > nttimeout=no
> > method=standard
> > overlapdial=yes
> > dialplan=0
> > localdialplan=0
> > cpndialplan=0
> > early_bconnect=yes
> > incoming_early_audio=no
> > nodialtone=no
> > presentation=-1
> > screen=-1
> > echocancel=yes
> > echotraining=no
> > jitterbuffer=4000
> > jitterbuffer_upper_threshold=0
> > hdlc=no
> > [MY_ISDN]
> > context=from-isdn-custom
> > ports=1,2,3,4
> > msns=*
> >
> > Asterisk 1.2.31.1 built by root @ voip1 on a i686
> running Linux on 2009-03-10 17:38:30 UTC
> >
> > Linux voip1 2.6.23-gentoo-r8 #1 SMP Fri Oct 17
> 01:10:38 CEST 2008 i686 Intel(R) Core(TM)2 Quad CPU Q6600 @
> 2.40GHz GenuineIntel GNU/Linux
> >
> > misdn 1.1.7.2
> > misdnuser 1.1.7.2
> > asterisk-chan_misdn 0.3.1
> > iaxmodem 1.1.1
> >
> > The receiving hylafax log (11111111111 is the fax
> number):
> >
> > Nov 05 11:10:29.18: [11410]: SESSION BEGIN 000000370
> 11111111111
> > Nov 05 11:10:29.18: [11410]: HylaFAX (tm) Version
> 4.4.4
> > Nov 05 11:10:32.90: [11410]: ANSWER: FAX
> CONNECTION  DEVICE '/dev/ttyIAX10006'
> > Nov 05 11:11:18.58: [11410]: SESSION END
> >
> > The sending hylafax log:
> >
> > Nov 05 11:10:09.31: [13507]: SESSION BEGIN 000008383
> 1111111111111111
> > Nov 05 11:10:09.31: [13507]: HylaFAX (tm) Version
> 4.2.5
> > Nov 05 11:10:09.31: [13507]: SEND FAX: JOB 5050 DEST
> 111111111 COMMID 000008383 DEVICE '/dev/ttyS1' FROM
> 'vieri<vieri at mydomain.com>'
> USER vieri
> > Nov 05 11:10:09.31: [13507]:<-- [12:AT+FCLASS=1\r]
> > Nov 05 11:10:09.42: [13507]: -->  [2:OK]
> > Nov 05 11:10:09.42: [13507]: DIAL 111111111
> > Nov 05 11:10:09.42: [13507]:<--
> [14:ATDT111111111\r]
> > Nov 05 11:10:18.76: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:19.90: [13507]: -->  [2:OK]
> > Nov 05 11:10:19.90: [13507]: HDLC frame too short (0
> bytes)
> > Nov 05 11:10:19.90: [13507]: DELAY 70 ms
> > Nov 05 11:10:19.97: [13507]:<-- [9:AT+FTH=3\r]
> > Nov 05 11:10:20.02: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:20.02: [13507]:<-- data [3]
> > Nov 05 11:10:20.02: [13507]:<-- data [2]
> > Nov 05 11:10:21.33: [13507]: -->  [2:OK]
> > Nov 05 11:10:21.33: [13507]: SEND send CRP (command
> repeat)
> > Nov 05 11:10:21.34: [13507]:<-- [9:AT+FRH=3\r]
> > Nov 05 11:10:21.65: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:26.26: [13507]: -->  [2:OK]
> > Nov 05 11:10:26.26: [13507]: HDLC frame too short (0
> bytes)
> > Nov 05 11:10:26.26: [13507]: DELAY 70 ms
> > Nov 05 11:10:26.33: [13507]:<-- [9:AT+FTH=3\r]
> > Nov 05 11:10:26.38: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:26.38: [13507]:<-- data [3]
> > Nov 05 11:10:26.38: [13507]:<-- data [2]
> > Nov 05 11:10:27.69: [13507]: -->  [2:OK]
> > Nov 05 11:10:27.70: [13507]: SEND send CRP (command
> repeat)
> > Nov 05 11:10:27.70: [13507]:<-- [9:AT+FRH=3\r]
> > Nov 05 11:10:27.94: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:30.61: [13507]: -->  [2:OK]
> > Nov 05 11:10:30.61: [13507]: REMOTE NSF "AD 00 55 48
> 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20
> 34 2E 34 2E 34"
> > Nov 05 11:10:30.61: [13507]: NSF remote fax equipment:
> unknown
> > Nov 05 11:10:30.61: [13507]: NSF possible remote
> station ID: "HylaFAX (tm) Version 4.4.4"
> > Nov 05 11:10:30.61: [13507]:<-- [9:AT+FRH=3\r]
> > Nov 05 11:10:30.85: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:35.56: [13507]: -->  [2:OK]
> > Nov 05 11:10:35.56: [13507]: HDLC frame too short (0
> bytes)
> > Nov 05 11:10:35.56: [13507]: DELAY 70 ms
> > Nov 05 11:10:35.64: [13507]:<-- [9:AT+FTH=3\r]
> > Nov 05 11:10:35.68: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:35.68: [13507]:<-- data [3]
> > Nov 05 11:10:35.68: [13507]:<-- data [2]
> > Nov 05 11:10:37.00: [13507]: -->  [2:OK]
> > Nov 05 11:10:37.00: [13507]: SEND send CRP (command
> repeat)
> > Nov 05 11:10:37.00: [13507]:<-- [9:AT+FRH=3\r]
> > Nov 05 11:10:37.26: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:39.93: [13507]: -->  [2:OK]
> > Nov 05 11:10:39.93: [13507]: REMOTE NSF "AD 00 55 48
> 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20
> 34 2E 34 2E 34"
> > Nov 05 11:10:39.93: [13507]: NSF remote fax equipment:
> unknown
> > Nov 05 11:10:39.93: [13507]: NSF possible remote
> station ID: "HylaFAX (tm) Version 4.4.4"
> > Nov 05 11:10:39.93: [13507]:<-- [9:AT+FRH=3\r]
> > Nov 05 11:10:40.17: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:44.87: [13507]: -->  [2:OK]
> > Nov 05 11:10:44.87: [13507]: HDLC frame too short (0
> bytes)
> > Nov 05 11:10:44.87: [13507]: DELAY 70 ms
> > Nov 05 11:10:44.94: [13507]:<-- [9:AT+FTH=3\r]
> > Nov 05 11:10:45.00: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:45.00: [13507]:<-- data [3]
> > Nov 05 11:10:45.00: [13507]:<-- data [2]
> > Nov 05 11:10:46.31: [13507]: -->  [2:OK]
> > Nov 05 11:10:46.31: [13507]: SEND send CRP (command
> repeat)
> > Nov 05 11:10:46.31: [13507]:<-- [9:AT+FRH=3\r]
> > Nov 05 11:10:46.58: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:47.87: [13507]: -->  [2:OK]
> > Nov 05 11:10:47.87: [13507]: HDLC frame too short (0
> bytes)
> > Nov 05 11:10:47.87: [13507]: DELAY 70 ms
> > Nov 05 11:10:47.94: [13507]:<-- [9:AT+FTH=3\r]
> > Nov 05 11:10:47.99: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:47.99: [13507]:<-- data [3]
> > Nov 05 11:10:47.99: [13507]:<-- data [2]
> > Nov 05 11:10:49.31: [13507]: -->  [2:OK]
> > Nov 05 11:10:49.31: [13507]: SEND send CRP (command
> repeat)
> > Nov 05 11:10:49.31: [13507]:<-- [9:AT+FRH=3\r]
> > Nov 05 11:10:49.49: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:54.28: [13507]: -->  [2:OK]
> > Nov 05 11:10:54.28: [13507]: HDLC frame too short (0
> bytes)
> > Nov 05 11:10:54.28: [13507]: DELAY 70 ms
> > Nov 05 11:10:54.35: [13507]:<-- [9:AT+FTH=3\r]
> > Nov 05 11:10:54.40: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:54.40: [13507]:<-- data [3]
> > Nov 05 11:10:54.40: [13507]:<-- data [2]
> > Nov 05 11:10:55.71: [13507]: -->  [2:OK]
> > Nov 05 11:10:55.71: [13507]: SEND send CRP (command
> repeat)
> > Nov 05 11:10:55.71: [13507]:<-- [9:AT+FRH=3\r]
> > Nov 05 11:10:55.98: [13507]: -->  [7:CONNECT]
> > Nov 05 11:10:58.66: [13507]: -->  [2:OK]
> > Nov 05 11:10:58.66: [13507]: REMOTE NSF "AD 00 55 48
> 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20
> 34 2E 34 2E 34"
> > Nov 05 11:10:58.66: [13507]: NSF remote fax equipment:
> unknown
> > Nov 05 11:10:58.66: [13507]: NSF possible remote
> station ID: "HylaFAX (tm) Version 4.4.4"
> > Nov 05 11:10:58.66: [13507]:<-- [9:AT+FRH=3\r]
> > Nov 05 11:10:58.90: [13507]: -->  [7:CONNECT]
> > Nov 05 11:11:03.58: [13507]: -->  [2:OK]
> > Nov 05 11:11:03.58: [13507]: HDLC frame too short (0
> bytes)
> > Nov 05 11:11:03.58: [13507]: DELAY 70 ms
> > Nov 05 11:11:03.65: [13507]:<-- [9:AT+FTH=3\r]
> > Nov 05 11:11:03.70: [13507]: -->  [7:CONNECT]
> > Nov 05 11:11:03.70: [13507]:<-- data [3]
> > Nov 05 11:11:03.70: [13507]:<-- data [2]
> > Nov 05 11:11:05.02: [13507]: -->  [2:OK]
> > Nov 05 11:11:05.02: [13507]: SEND send CRP (command
> repeat)
> > Nov 05 11:11:05.02: [13507]:<-- [9:AT+FRH=3\r]
> > Nov 05 11:11:09.98: [13507]: -->  [2:OK]
> > Nov 05 11:11:09.98: [13507]: DELAY 200 ms
> > Nov 05 11:11:10.18: [13507]: No answer (T.30 T1
> timeout)
> > Nov 05 11:11:10.18: [13507]: SEND FAILED: JOB 5050
> DEST 111111111 ERR No answer (T.30 T1 timeout)
> > Nov 05 11:11:10.18: [13507]:<-- [9:AT+FTH=3\r]
> > Nov 05 11:11:10.23: [13507]: -->  [7:CONNECT]
> > Nov 05 11:11:10.23: [13507]:<-- data [3]
> > Nov 05 11:11:10.23: [13507]:<-- data [2]
> > Nov 05 11:11:11.55: [13507]: -->  [2:OK]
> > Nov 05 11:11:11.55: [13507]:<-- [5:ATH0\r]
> > Nov 05 11:11:11.97: [13507]: -->  [10:NO
> CARRIER]
> > Nov 05 11:11:11.97: [13507]: MODEM No carrier
> > Nov 05 11:11:11.97: [13507]: SESSION END
> >
> > If you need other logging information, please let me
> know.
> >
> > Thanks,
> >
> > Vieri
> >    
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 