[asterisk-users] dahdi channel not showing up

[Tzafrir Cohen]

On Tue, Nov 03, 2009 at 12:22:25PM +0200, Chris Datfung wrote:
> Hi,
> 
> I have a X101P card and am running Asterisk SVN-trunk-r226890. The
> X101P card seems to be identified properly:
> 
> debian:/usr/src/dahdi-tools# dahdi_hardware
> pci:0000:01:01.0     wcfxo+       e159:0001 Wildcard X101P

There's a kernel module handling that card.

> 
> debian:/usr/src/dahdi-tools# dahdi_cfg -vv
> DAHDI Tools Version - SVN-trunk-r7409
> 
> DAHDI Version: SVN-trunk-r7445
> Echo Canceller(s): MG2
> Configuration
> ======================
> 
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)

You wrote configuration for dahdi channel '1' in /etc/dahdi/system.conf.

> 
> 1 channels to configure.
> 
> Setting echocan for channel 1 to mg2

No Error: thus the channel actually exists.

> 
> *CLI> dahdi show status
> Description                              Alarms  IRQ    bpviol CRC4
> Fra Codi Options  LBO
> Wildcard X101P Board 1                   OK      0      0      0
> CAS Unk  YEL      0 db (CSU)/0-133 feet (DSX-1)

There's a span number 1. This is basically impled from the fact that the
module is loaded.

> 
> but when I run dahdi show channels I can only see the psuedo channel:
> 
> *CLI> dahdi show channels
>    Chan Extension  Context         Language   MOH Interpret
> Blocked    State
>  pseudo            default                    default
>        In Service
> 
> What am I missing?

Configuration for the channel in /etc/asterisk/chan_dahdi.conf

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir