[asterisk-users] SIP trunk with > 250 lines

[Danny Nicholas]

I use a Dell with the 1Gb Ethernet on board, but had to clock it down to 100
Mhz because * has an issue with Dell on board Ethernet.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Christian
Victor
Sent: Tuesday, March 24, 2009 11:47 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] SIP trunk with > 250 lines

 

2009/3/24 Danny Nicholas <danny at debsinc.com>

Here are a few "look outs";  Using conference rooms will increase your
bandwidth requirements.  On board Network controllers will affect
performance in this "high-use" scenario.  250 simultaneous calls will use
about 7.5Mb of bandwidth depending on the codec(s) you use.

I think we will use G.711a to prevent transcoding. So I calculate with 25 to
50 Mbit. I hope a dedicated 1GB Ethernet (although on board) will do it.

MeetMe will not be used.

Chris

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090324/1df18d61/attachment.htm