[asterisk-users] T1 problem (call using a .call file)

[Pascal Bruno]

Here is what my extensions.conf file has:

exten => _NXXNXXXXXX,1,Dial(DAHDI/g1/${EXTEN})
exten => _NXXNXXXXXX,n,Hangup()

exten => _1NXXNXXXXXX,1,Dial(DAHDI/g1/${EXTEN})
exten => _1NXXNXXXXXX,n,Hangup()

Using the phone, I can dial any numbers succesfully.

And here is my call file:

Channel: DAHDI/g1/1XXXXXXXXXX
Callerid: XXXXXXXXXX
MaxRetries: 1
RetryTime: 5
WaitTime: 60
Context: test
Extension: s
Priority: 1

with the call file I can dial my cellphone which begin with 754XXXXXXX
but when I call my friend's cellphone from new york which is 201XXXXXXX i
get progress code 127 as follows

-- Attempting call on DAHDI/g1/1201XXXXXXX for s at test:1 (Retry 1)
    -- Requested transfer capability: 0x00 - SPEECH
    -- PROGRESS with cause code 127 received

I tried with the prefix 1 and without the prefix 1 it is always the same
thing, but with the handset I dial my phone and my friend's phone
succesfully with and without the 1




On Thu, Mar 19, 2009 at 9:21 AM, Danny Nicholas <danny at debsinc.com> wrote:

>  Please paste the call file content (with the number XXXX’ed of course)
> and the Dial section from extensions.conf.
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Pascal Bruno
> *Sent:* Wednesday, March 18, 2009 6:24 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] T1 problem (call using a .call file)
>
>
>
> This has to be a bug, because I dont know what else to try here
>
>
>
>
>
> On Wed, Mar 18, 2009 at 11:16 AM, Pascal Bruno <tipascal at gmail.com> wrote:
>
> Nope, I always dial 1 + 10 digits for all my numbers.  It works on all
> numbers when I am using my phone (Analogue or IP) but when I do it using a
> .call file it does not work on some numbers mostly.  That is the weirdest
> thing I have ever seen.  I tried different codecs in the call file, I still
> get the PROGRESS with cause code 127
>
>
>
>
>
>
>
>
>
> On Wed, Mar 18, 2009 at 10:47 AM, David Backeberg <dbackeberg at gmail.com>
> wrote:
>
> On Mon, Mar 16, 2009 at 6:42 PM, Pascal Bruno <tipascal at gmail.com> wrote:
> > I have a weird problem with call using my T1 card.  I can make calls fine
> > using my analog and IP phones, but when I try to initiate a call using a
> > .call file, I get the following error
> >  -- Attempting call on DAHDI/g1/1XXXXXXXXXX for s at test:1 (Retry 1)
> >     -- Requested transfer capability: 0x00 - SPEECH
> >     -- PROGRESS with cause code 127 received
> > it happens on certain numbers I dial, but if I dial that same number with
> an
> > ip or analog phone that use the T1 channel, the call is going through
> > normally.
> > Anybody knows why?
>
> Are you doing anything silly with prefixing or short-circuit dialing?
>
> in other words..
>
> You dial 8 for an outside line, then 1+10 digits
> and you're forgetting to do that for some numbers?
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090319/4d417948/attachment.htm