[asterisk-users] Noisy Ring Back Tone with TE205P card

[Imanol Pardavila]

Hi,
If anyone has the same problem, I solved it doing:

genzaptelconf -sdv

It might have been a problema with the card or the module.
Regards

Imanol Pardavila escribió:
> Hi,
> I stilll continue with the problem but I have noticed something new 
> that maybe a clue. The noise during the call progress is made by the 
> appearance of the different lines in the asterisk CLI, I mean, each 
> line is posted in the CLI generates a noise in the call's signallling 
> tone. For example, if I try doing a call during a resetinterval 
> option, which reset all free channels, each line posted in the CLI 
> generates a burst noise.
> Any ideas?
> Thanks
> Regards
>
> Imanol Pardavila escribió:
>> Hi,
>> I am having problems with an Asterisk with a Digium TE205P card. The 
>> issue is that the Ring Back Tone is noisy. I am making modem's calls 
>> and this noise influences on the initial negotiation protocol, so 
>> modems have to recall.
>>
>> My configuration is:
>>
>> Asterisk version: Asterisk 1.4.21.2
>> Linux version: CentOS release 5.2 (Final)
>> Card: Digium TE205P
>>
>> ##zapata.conf#################################################
>> ; Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
>> ; Zaptel Channels Configurations (zapata.conf)
>> ;
>> ; This is not intended to be a complete zapata.conf. Rather, it is 
>> intended
>> ; to be #include-d by /etc/zapata.conf that will include the global 
>> settings
>> ;
>> [channels]
>> ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1"
>> language=es
>> context=default
>> switchtype=euroisdn
>> pridialplan=unknown
>> prilocaldialpla=national
>> signalling=pri_cpe
>> resetinterval=never
>> group=1
>> channel => 1-15,17-31
>>
>> ; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
>> group=2
>> channel => 32-46,48-62
>>
>> ##zaptel.conf#################################################
>>
>> # Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
>> # Zaptel Configuration File
>> #
>> # This file is parsed by the Zaptel Configurator, ztcfg
>> #
>> # It must be in the module loading order
>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>> span=1,0,0,ccs,hdb3,crc4
>> bchan=1-15,17-31
>> hardhdlc=16
>>
>> # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
>> span=2,0,0,ccs,hdb3,crc4
>> bchan=32-46,48-62
>> hardhdlc=47
>>
>> # Global data
>> loadzone        = es
>> defaultzone     = es
>>
>> ##extensions.conf###########################################
>>
>> exten =>999888777,1,Goto(JUMP,s,1)
>>
>> [JUMP]
>>
>> exten => s,1,Dial(Zap/R2/666666666,15,r)
>> exten => s,2,Goto(s-${DIALSTATUS},1)
>> exten => s-BUSY,1,Goto(HANGUP,s,1)
>> exten => s-NOANSWER,1,Goto(HANGUP,s,1)
>> exten => s-CHANUNAVAIL,1,Goto(HANGUP,s,1)
>> exten => s-CONGESTION,1,Goto(HANGUP,s,1)
>>
>> [HANGUP]
>> exten => s,1,Hangup
>>
>> [DID_span_1]
>> include = default
>> [DID_span_2]
>> include = default
>>
>>
>> I have no idea about where could be the problem. I can't see anything 
>> rare in the logs....
>> Any ideas?
>>
>> Thanks
>> Regards
>>
>>
>>
>>
>>
>>
>
>