[asterisk-users] 428 Loop Detected

[Asif Iqbal]

On Mon, Mar 16, 2009 at 12:10 AM, Steve Totaro
<stotaro at totarotechnologies.com> wrote:
> Again, if I am interpreting this correctly, he is not using SIP.  A
> four port card 2fxo/2fxs means to me that he is not using SIP at all.

You are correct. I was confused. It is Zap (zaptel) channel

>
> If by card, you mean some kind of SIP gateway, then I misunderstood
> and the problem, but seeing DAHDI channels leads me to believe that
> SIP is not required and actually causing your problems.
>
> SIP is a protocol for VoIP, DAHDI/Zaptel is TDM (analog POTS in this
> case)...  If you had a SIP device, it would be connected to the data
> network, not a phone line.  Can you just plug your phone into a
> regular landline jack and get dialtone?  If so, forget SIP for now.
>
> Comment out or delete all your sip.conf peers since you are not using SIP.
>
> Change your dialplan to not (Dial/SIP" but (Dial/DAHDI/1,10) and the
> correct channel to your FXS port that the phone is connected to.

Dial(Zap/1) worked like a charm.

Thanks all for your help

>
> Thanks,
> Steve Totaro
>
> On Sun, Mar 15, 2009 at 9:20 PM, Marco Mouta <marco.mouta at gmail.com> wrote:
>> Hi,
>>
>> problem is that you are saying that phone in sip.conf is at the same
>> ip address of your asterisk box so you are dialing into a loop to your
>> self asterisk box
>>
>> [phone]
>> type=friend
>> context=phone1
>> secret=g00dpazzwerd
>> bindport=5060
>> host=192.168.1.106
>> dtmfmode=rfc2833
>>
>> what you need is:
>>
>> [phone]
>> type=friend
>> context=phone1
>> secret=g00dpazzwerd
>> dtmfmode=rfc2833
>> host=dynamic
>> ;configuring your codecs (i don't know what else you have configured,
>> just preventing audio for you)
>> disallow=all
>> allow=ulaw
>> allow=alaw
>> allow=gsm
>>
>>
>> Dial sip/phone is enough too..
>>
>> [from-pstn]
>> ;include => default
>> exten => s,1,Dial(SIP/phone,10)
>> exten => s,2,Voicemail(line)
>> exten => s,3,Hangup
>>
>>
>> hope it helps.
>>
>> don't forget to asterisk reload on cli.
>>
>> Looking forward to hearing from you.
>>
>> cheers
>>
>> --
>> Marco Mouta
>>
>>
>>
>> On Sun, Mar 15, 2009 at 10:28 PM, Asif Iqbal <vadud3 at gmail.com> wrote:
>>> Hi I looked at few emails related to this subject. And still not sure
>>> how to solve the loop detect problem for my case
>>>
>>> iqbala at improvise:/etc/asterisk$ cat sip.conf
>>>
>>> [general]
>>> context=line1
>>>
>>> [phone]
>>> type=friend
>>> context=phone1
>>> secret=g00dpazzwerd
>>> bindport=5060
>>> host=192.168.1.106
>>> dtmfmode=rfc2833
>>>
>>> [line]
>>> type=friend
>>> context=line1
>>> secret=anothers33cret
>>> bindport=5061
>>> host=192.168.1.106
>>> dtmfmode=rfc2833
>>>
>>> iqbala at improvise:/etc/asterisk$ cat extensions.conf
>>> [default]
>>> exten => s,1,Answer
>>> exten => s,2,Wait(2)
>>> exten => s,3,Playback(tt-monkeys)
>>> exten => s,4,Hangup
>>>
>>> [from-internal]
>>> include => default
>>>
>>> [phone1]
>>>
>>> [from-pstn]
>>> ;include => default
>>> exten => s,1,Dial(SIP/phone at phone,10)
>>> exten => s,2,Voicemail(line)
>>> exten => s,3,Hangup
>>>
>>> [line1]
>>>
>>>
>>> So my home land line is going to the FXO port and my home phone is
>>> hanging off of FXS port.
>>>
>>> Here are the contexts for my fxo/fxs card
>>>
>>>
>>> improvise*CLI> dahdi show channels
>>>   Chan Extension  Context         Language   MOH Interpret
>>>  pseudo            default                    default
>>>      1            from-internal              default
>>>      2            from-internal              default
>>>      3            from-pstn                  default
>>>      4            from-pstn                  default
>>>
>>>
>>> I want to call from my cell and make my home phone ring and if I dont
>>> pickup in 10 secs I want the call
>>> go to my voicemail. But I am getting a loop detect. The debug output
>>> is attached.
>>>
>>> What am I doing wrong?
>>>
>>> --
>>> Asif Iqbal
>>> PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
>>> A: Because it messes up the order in which people normally read text.
>>> Q: Why is top-posting such a bad thing?
>>>
>>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
> --
> Thanks,
> Steve Totaro
> +18887771888 (Toll Free)
> +12409381212 (Cell)
> +12024369784 (Skype)
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?