[asterisk-users] Portech MV3770 & Caller-ID

[Håkan Källberg]

On Thu, Mar 12, 2009 at 09:53:48AM +0100,   wrote:
> On 3/11/2009, "Hĺkan Källberg" <hk at simulina.se> wrote:
> >On Wed, Mar 11, 2009 at 04:16:43PM +0100, Christian Victor wrote:
> >> 2009/3/11 Hĺkan Källberg <hk at simulina.se>
> >> > Does anyone of you have Caller Presentation working in the other
> >> > direction?? My mv370 is working well, execpt the Caller ID on outgoing
> >> > GSM calls. This works with the SIM card/Provider I am using if I put
> 
> >> All I had to do is to enable the Caller ID ind the Mobile->Settings dialog
> >> for each SIM (something like presentation/revocation afair). I did NOT set
> >> the GSM number anywhere nor do I send it from Asterisk.
> 
> >That is what I'd expect too, but, no...
> >
> >    Mobile->Settings->CLID Presentation-> Supression or Invocation
> >
> >it makes no difference. (and yes - I do reboot:-) When I move the SIM
> >to a phone, it works well...
>
> I'm not sure wether it's an operator-specific setting or not.  But i
> don't handle callerid supression/invocation with the MV370, i rather do
> it with asterisk.
> 
> Try simply prefix the number with *31# for invocation and #31# for
> supression.  Example:
> 
> [...]
> exten => _06[237]0NXXXXXX!,n,Dial(SIP/*31#${EXTEN}@gsmgw)
> [...]
> 
> Again: this method may be country or even operator specific, check with
> the provider if the above works.  If it does, simply use the prefixes
> above and forget about the MV370's settings.

It worked like a charm!! Szabó András <szundi at gmail.com> came up with the
same solution too. Thank you *very* much, both of you!!

Håkan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 163 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20090313/2f3df7c6/attachment.pgp