[asterisk-users] BRI/ISDN, misdn.conf/misdn-init.conf, OpenVOX B100P and Etisalat in Dubai

Giorgio Incantalupo gincantalupo at fgasoftware.com
Thu Mar 12 09:05:03 CDT 2009


Hi Gavin,

if you can make and receive calls it works...do not worry if your line 
is shown as DOWN, some telco turns it off but it works without problem.
Remember to ask your telco for the right signalling and set it the right 
way (PTP or PMP).

Giorgio Incantalupo

Gavin Henry wrote:
> Hi All,
>
> We've got msidn configured:
>
> Port  1: TE-mode BRI S/T interface line (for phone lines)
>  -> Protocol: DSS1 (Euro ISDN)
>  -> childcnt: 2
> --------
>
> mISDN_close: fid(3) isize(131072) inbuf(0x8fd5060) irp(0x8fd5060)
> iend(0x8fd5060)
>
>
>  and running on Asterisk 1.4.21.2:
>
> pbx*CLI> misdn show stacks
> BEGIN STACK_LIST:
>   * Port 1 Type TE Prot. PMP L2Link UP L1Link:UP Blocked:0  Debug:0
>
> but I'm not sure how to check our settings are right with Etisalat, as
> above then goes to:
>
> pbx*CLI> misdn show stacks
> BEGIN STACK_LIST:
>   * Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN Blocked:0  Debug:0
>
> /etc/misdn-init.conf:
>
> card=1,hfcpci
> te_ptmp=1
> poll=128
> dsp_poll=128
> dsp_options=0
> dtmfthreshold=100
> debug=0
>
> /etc/asterisk/misdn.conf:
>
> [general]
> debug = 0
> method=standard
> bridging=no
> stop_tone_after_first_digit=yes
> append_digits2exten=yes
> dynamic_crypt=no
> crypt_prefix=**
> crypt_keys=test,muh
>
> [default]
> context=misdn
> language=en
> musicclass=default
> senddtmf=yes
> far_alerting=no
> allowed_bearers=all
> nationalprefix=0
> internationalprefix=00
> rxgain=0
> txgain=0
> te_choose_channel=no
> pmp_l1_check=no
> reject_cause=16
> need_more_infos=no
> nttimeout=no
> method=standard
> dialplan=0
> localdialplan=0
> cpndialplan=0
> early_bconnect=yes
> incoming_early_audio=no
> nodialtone=no
> callgroup=1
> pickupgroup=1
> presentation=-1
> screen=-1
> echocancel=yes
> jitterbuffer=4000
> jitterbuffer_upper_threshold=0
> hdlc=no
>
> [isdn]
> ports=1
> context=from-pstn
> msns=*
>
>
> Now we've setup PRi before, but not BRI and not in Dubai.
>
> If anyone has an idea or config that would be great and I'd make sure
> it goes on voip-info.org for others too.
>
> Thanks,
> Gavin.
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>   





More information about the asterisk-users mailing list