[asterisk-users] faxing via linksys SPA3102 half page goes through

[Joseph]

On 03/04/09 18:01, Marco Signorini wrote:
>Joseph wrote:
>> As I remember I have experimented with gain on PSTN line as well but have reset back to default.
>> I have:
>> SPA To PSTN Gain:0
>> PSTN To SPA Gain:0
>>
>> I think "0"  is the default.
>>
>>   
>Yes, "0" is the default.
>Is the fax machine connected to the FXS port or do you use the SPA3102
>only as a SIP 2 PSTN gateway?
>If you use the FXS port, please take a look at the gain parameters you
>can find in the "Miscellaneous" section in the "Regional" page (log in
>as Administrator then switch to the "advanced" report).
>
>Now I've -5 as input gain and -2 as output. I don't know if this could
>helps you.

In my case I only use SIP 2 PSTN gateway so gain most likely wouldn't help me much.
I'll try to reset the unit to default setting and start from there.

-- 
#Joseph
GPG KeyID: ED0E1FB7